Skip to content

Latest commit

 

History

History
108 lines (88 loc) · 3.94 KB

ufw.md

File metadata and controls

108 lines (88 loc) · 3.94 KB

UFW (uncomplicated firewall)

UFW (uncomplicated firewall) is a firewall configuration tool for Linux that runs on top of IPTables, included by default within Ubuntu distributions. It provides a streamlined interface for configuring common firewall use cases via the command line.

Enable UFW

To check if ufw is enabled, run:

sudo ufw status

Allow SSH before enabling, or you will lock yourself out of a remote machine:

sudo ufw allow OpenSSH

To enable UFW on your system, run:

sudo ufw enable

If for some reason you need to disable UFW, you can do so with the following command:

sudo ufw disable

Defaults

sudo ufw default deny incoming
sudo ufw default allow outgoing

Rules

COMMAND DESCRIPTION
sudo ufw allow 80/tcp Allow a port and protocol
sudo ufw allow 443 Allow a port, TCP and UDP
sudo ufw allow 6000:6010/tcp Allow a port range
sudo ufw allow from 192.168.1.0/24 to any port 22 proto tcp Allow a subnet to a port
sudo ufw allow in on eth1 to any port 5432 Allow on one interface
sudo ufw allow "Nginx Full" Allow an application profile
sudo ufw limit ssh Rate-limit (6 attempts per 30 s)
sudo ufw deny 23 Deny a port
sudo ufw reject 25 Reject with a reply
sudo ufw delete allow 80/tcp Delete a rule
sudo ufw delete <NUMBER> Delete by number from status numbered
sudo ufw insert 1 deny from 203.0.113.9 Insert at the top
sudo ufw reset Remove all rules and disable
sudo ufw reload Reload the rules

Block an IP Address/Subnet

sudo ufw deny from 203.0.113.0/24

Block rules must be above allows to win. Use ufw insert 1 ... if an allow rule already matches.

Inspect

COMMAND DESCRIPTION
sudo ufw status verbose Rules and default policies
sudo ufw status numbered Rules with numbers
sudo ufw app list Application profiles
sudo ufw logging on Enable logging (/var/log/ufw.log)
sudo ufw show added Rules as commands

Docker Warning

Docker publishes ports through its own iptables rules, which bypass UFW. A -p 8080:80 container is reachable even if UFW denies 8080. Bind to localhost (-p 127.0.0.1:8080:80) or manage rules in the DOCKER-USER chain. See Docker Networking.

Common Recipes

# Web server
sudo ufw allow 80,443/tcp

# SSH only from the LAN
sudo ufw delete allow OpenSSH
sudo ufw allow from 192.168.1.0/24 to any port 22 proto tcp

# Rate-limit SSH
sudo ufw limit 22/tcp

# Block outgoing to one address
sudo ufw deny out to 203.0.113.9

# Allow a container host forwarding (see Docker Warning)
sudo ufw route allow in on eth0 out on docker0 to any port 80 proto tcp

ufw route rules go in the forward chain and apply to routed and NAT traffic, which includes forwarded container traffic. sudo ufw default deny routed sets the default for that chain.

IPv6 and Logging

  • IPv6 is enabled in /etc/default/ufw (IPV6=yes). Reload with sudo ufw disable && sudo ufw enable after changing it.
  • Log levels: sudo ufw logging low|medium|high|full. Blocked packets appear in /var/log/ufw.log and journalctl -k | grep UFW.
  • Read a log line: SRC= is the source, DST= the destination, DPT= the destination port, PROTO= the protocol.

Backup and Rollback

sudo cp -a /etc/ufw /root/ufw-backup           # rules live in /etc/ufw/user.rules and user6.rules
sudo ufw show added                            # rules as commands, easy to reapply

When changing rules over SSH, keep a second session open. If you lock yourself out, use the console: sudo ufw disable.

UFW uses the nftables backend through iptables-nft on current Ubuntu. For raw nftables see nftables.

Config Files

PATH DESCRIPTION
/etc/default/ufw Default policies, IPv6 on/off
/etc/ufw/before.rules Rules applied before UFW's own (e.g. NAT, ICMP)
/etc/ufw/applications.d/ Application profiles