arch.mk

## CPU Architecture selection via $ARCH

# check for math library
ifeq ($(SPMATH),1)
  # SP Math
  MATH_OBJS:=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_int.o
else
  ifeq ($(SPMATHALL),1)
    # SP Math all
    CFLAGS+=-DWOLFSSL_SP_MATH_ALL
    MATH_OBJS:=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_int.o
  else
    # Fastmath
    CFLAGS+=-DUSE_FAST_MATH
    MATH_OBJS:=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/integer.o $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/tfm.o
  endif
endif

# Default flash offset
ARCH_FLASH_OFFSET?=0x0

# Default SPI driver name
SPI_TARGET=$(TARGET)

# Default UART driver name
UART_TARGET=$(TARGET)

# Include some modules by default
WOLFCRYPT_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sha256.o \
                $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/hash.o \
                $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/memory.o \
                $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/wc_port.o \
                $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/wolfmath.o


ifeq ($(ARCH),x86_64)
  CFLAGS+=-DARCH_x86_64 -DFAST_MEMCPY
  ifeq ($(FORCE_32BIT),1)
    NO_ASM=1
    CFLAGS+=-DFORCE_32BIT
  endif
  ifeq ($(SPMATH),1)
    ifeq ($(NO_ASM),1)
      ifeq ($(FORCE_32BIT),1)
        MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
        CFLAGS+=-DWOLFSSL_SP_DIV_WORD_HALF
      else
        MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c64.o
      endif
    else
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_x86_64.o
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_x86_64_asm.o
      WOLFCRYPT_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/cpuid.o
    endif
  endif
  ifeq ($(TARGET),x86_64_efi)
     OBJS+=src/boot_x86_64.o
    ifeq ($(DEBUG),1)
      CFLAGS+=-DWOLFBOOT_DEBUG_EFI=1
    endif
  endif
endif

## ARM Cortex-A
ifeq ($(ARCH),AARCH64)
  ifeq ($(TARGET),aarch64_efi)
    # UEFI app: Linux GNU toolchain (freestanding EFI ABI), not aarch64-none-elf-
    CROSS_COMPILE?=aarch64-linux-gnu-
  else
    CROSS_COMPILE?=aarch64-none-elf-
  endif
  CFLAGS+=-DARCH_AARCH64 -DFAST_MEMCPY
  ifeq ($(TARGET),aarch64_efi)
    # UEFI app: gnu-efi CRT0 is the entry; do_boot is in boot_aarch64_efi.o.
    # Skip the bare-metal reset (boot_aarch64_start.S) and EL2/GIC glue.
    OBJS+=src/boot_aarch64_efi.o
  else
    OBJS+=src/boot_aarch64.o src/boot_aarch64_start.o
  endif

  ifeq ($(TARGET),zynq)
    ARCH_FLAGS=-march=armv8-a+crypto
    CFLAGS+=$(ARCH_FLAGS) -DCORTEX_A53
    CFLAGS+=-DNO_QNX
    # Support detection and skip of U-Boot legacy header */
    CFLAGS+=-DWOLFBOOT_UBOOT_LEGACY
    CFLAGS+=-DWOLFBOOT_DUALBOOT
    # FPGA bitstream-from-FIT is supported via the PMU firmware
    # (PM_FPGA_LOAD). Enable with FPGA_BITSTREAM=1 (opt-in).

    ifeq ($(HW_SHA3),1)
      # Use HAL for hash (see zynqmp.c)
      HASH_HAL=1
      CFLAGS+=-DWOLFBOOT_ZYNQMP_CSU
    endif

    ifeq ($(ZYNQMP_FSBL),1)
      # wolfBoot fully replaces the Xilinx FSBL: the BootROM authenticates and
      # loads wolfBoot into OCM at EL3, and wolfBoot runs psu_init() to bring up
      # the PLLs/DDR/MIO/clocks before loading the downstream images. wolfBoot
      # therefore links and runs entirely from OCM (DDR is not up at entry).
      #
      # The board-specific psu_init_gpl.c / psu_init_gpl.h (generated from the
      # XSA, Xilinx copyright) are supplied at build time from
      # ZYNQMP_PSU_INIT_DIR and are NOT part of the wolfBoot tree. The
      # hal/zynqmp/ shim headers (xil_io.h, sleep.h) let that unmodified file
      # compile. Set EL3_SECURE=1 in the target .config.
      ZYNQMP_PSU_INIT_DIR?=hal/board/zynqmp
      CFLAGS+=-DWOLFBOOT_ZYNQMP_FSBL
      CFLAGS+=-Ihal/zynqmp -I$(ZYNQMP_PSU_INIT_DIR)
      LSCRIPT_IN=hal/zynqmp_ocm.ld
      OBJS+=hal/zynqmp_psu_shim.o
      OBJS+=hal/zynqmp_atf.o
      OBJS+=$(ZYNQMP_PSU_INIT_DIR)/psu_init_gpl.o

      # Load the PMU configuration object (EEMI permission table) into PMU
      # firmware so the APU can control the SoC nodes. Like psu_init_gpl.c the
      # pm_cfg_obj.c is design-specific and supplied from ZYNQMP_PSU_INIT_DIR.
      ifeq ($(ZYNQMP_PM_CFG),1)
        CFLAGS+=-DWOLFBOOT_ZYNQMP_PM_CFG
        OBJS+=$(ZYNQMP_PSU_INIT_DIR)/pm_cfg_obj.o
      endif

      # Run the PS-GTR serdes init (USB3/SATA/PCIe/DP PHY lanes). Required if the
      # kernel drives a PS-GTR peripheral (e.g. USB3 dwc3, whose probe hangs on
      # an unclocked PHY). Skipped by default since QSPI/SD/RGMII boot needs no
      # serdes; the shim runs the full calibrated sequence when enabled.
      ifeq ($(ZYNQMP_PSU_INIT_SERDES),1)
        CFLAGS+=-DZYNQMP_PSU_INIT_SERDES
      endif

      # FSBL security features (eFuse read, PUF, AES-CSU). At EL3 these access
      # the CSU/eFuse controllers directly (pmu_mmio is direct MMIO in FSBL
      # mode). Read-only eFuse dump today; PUF/AES land incrementally.
      ifeq ($(ZYNQMP_SEC),1)
        CFLAGS+=-DWOLFBOOT_ZYNQMP_FSBL_SEC
      endif
      # PUF register+regenerate self-test at boot (bring-up only; registers the
      # PUF every boot). Opt-in, needs ZYNQMP_SEC=1.
      ifeq ($(ZYNQMP_PUF_SELFTEST),1)
        CFLAGS+=-DWOLFBOOT_ZYNQMP_PUF_SELFTEST
      endif
      # AES-CSU known-answer self-test at boot (KUP key; eFuse-safe). Opt-in.
      ifeq ($(ZYNQMP_AES_SELFTEST),1)
        CFLAGS+=-DWOLFBOOT_ZYNQMP_AES_SELFTEST
      endif
    endif

  endif

  ifeq ($(TARGET),versal)
    # AMD Versal ACAP (VMK180) - Dual Cortex-A72
    ARCH_FLAGS=-mcpu=cortex-a72+crypto -march=armv8-a+crypto -mtune=cortex-a72
    CFLAGS+=$(ARCH_FLAGS) -DCORTEX_A72
    CFLAGS+=-DWOLFBOOT_DUALBOOT
    # Support detection and skip of U-Boot legacy header
    CFLAGS+=-DWOLFBOOT_UBOOT_LEGACY
    # NOTE: FPGA_BITSTREAM is stubbed on Versal (PL config is a PDI loaded
    # by the PLM via XilLoader Load-PDI IPI - not yet implemented). Leave
    # FPGA_BITSTREAM off until that path lands.
    # PLM owns RVBAR on Versal in JTAG boot; skip RVBAR writes
    CFLAGS+=-DSKIP_RVBAR=1
    # Disable SDMA for multi-block transfers - use PIO instead.
    # The Versal Arasan SDHCI controller does not restart SDMA after
    # boundary crossings via SRS22/SRS23 writes (Cadence-specific behavior).
    CFLAGS_EXTRA+=-DSDHCI_SDMA_DISABLED
  endif

  ifeq ($(TARGET),nxp_ls1028a)
    ARCH_FLAGS=-mcpu=cortex-a72+crypto -march=armv8-a+crypto -mtune=cortex-a72
    CFLAGS+=$(ARCH_FLAGS) -DCORTEX_A72
    # ZynqMP RVBAR (0xFD5C0040) does not exist on LS1028A -- the store faults
    # pre-UART. Its reset vector comes from the boot ROM (DCFG BOOTLOCPTR).
    CFLAGS+=-DSKIP_RVBAR=1
    # MMU on (boot_aarch64_start.S LS1028A table): DDR Normal cacheable -- required
    # for coherency with the ENETC coherent DMA (SICAR=0x27276767); CCSR/BAR Device.
    CFLAGS +=-ffunction-sections -fdata-sections
    LDFLAGS+=-Wl,--gc-sections

    ifeq ($(DEBUG_UART),0)
      CFLAGS+=-fno-builtin-printf
    endif

    SPI_TARGET=nxp
  endif

  # Default ARM ASM setting for unrecognized AARCH64 targets
  ifeq ($(filter zynq versal nxp_ls1028a,$(TARGET)),)
    NO_ARM_ASM?=1
  endif

  ifeq ($(SPMATH),1)
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_arm64.o
  endif
  ifneq ($(NO_ARM_ASM),1)
    ARCH_FLAGS=-mstrict-align
    CFLAGS+=$(ARCH_FLAGS) -DWOLFSSL_ARMASM -DWOLFSSL_ARMASM_INLINE -DWC_HASH_DATA_ALIGNMENT=8 -DWOLFSSL_AARCH64_PRIVILEGE_MODE
    WOLFCRYPT_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/cpuid.o \
                      $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-sha512-asm_c.o \
                      $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-sha3-asm_c.o \
                      $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-aes-asm_c.o \
                      $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-sha256-asm_c.o
  endif
endif

## ARM Cortex-M
ifeq ($(ARCH),ARM)
  CROSS_COMPILE?=arm-none-eabi-
  CFLAGS+=-DARCH_ARM
  CFLAGS+=-mthumb -mlittle-endian
  LDFLAGS+=-mthumb -mlittle-endian
  ifeq ($(USE_GCC),1)
    ifeq ($(findstring clang,$(notdir $(CC))),)
    CFLAGS+=-mthumb-interwork
    LDFLAGS+=-mthumb-interwork
    endif
  endif

  ## Target specific configuration
  ifeq ($(TARGET),samr21)
    CORTEX_M0=1
  endif
  ifeq ($(TARGET),imx_rt)
    CORTEX_M7=1
  endif
  ifeq ($(TARGET),stm32l0)
    CORTEX_M0=1
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32c0)
    CORTEX_M0=1
    ARCH_FLASH_OFFSET=0x08000000
  endif

  ifeq ($(TARGET),stm32g0)
    CORTEX_M0=1
    ARCH_FLASH_OFFSET=0x08000000
  endif

  ifeq ($(TARGET),stm32g4)
    ARCH_FLASH_OFFSET=0x08000000
  endif

  ifeq ($(TARGET),stm32f1)
    CORTEX_M3=1
    NO_ARM_ASM=1
    ARCH_FLASH_OFFSET=0x08000000
  endif

  ifeq ($(TARGET),stm32f4)
    ARCH_FLASH_OFFSET=0x08000000
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),max32666)
    ARCH_FLASH_OFFSET=0x10000000
    ifeq ($(MAX32666_FTHR2),1)
      CFLAGS+=-DMAX32666_FTHR2
    endif
    # MAX3266X TPU hardware SHA256 acceleration (requires MSDK_DIR)
    ifeq ($(MAX3266X_TPU),1)
      NO_ARM_ASM=1
      CFLAGS+=-DMAX3266X_SHA -DFAST_MEMCPY
      CFLAGS+=-ffunction-sections -fdata-sections
      CFLAGS+=-DTARGET=MAX32665 -DTARGET_REV=0x4131
      ifeq ($(MAX3266X_OLD),1)
        # Older Maxim SDK tree (flat MAX32665PeriphDriver layout)
        CFLAGS+=-DWOLFSSL_MAX3266X_OLD
        MAX3266X_CFLAGS:= \
          -I$(MSDK_DIR)/Libraries/MAX32665PeriphDriver/Include/ \
          -I$(MSDK_DIR)/Libraries/CMSIS/Device/Maxim/MAX32665/Include/ \
          -I$(MSDK_DIR)/Libraries/CMSIS/Include/
        CFLAGS+=$(MAX3266X_CFLAGS)
        OBJS+=$(MSDK_DIR)/Libraries/MAX32665PeriphDriver/Source/mxc_sys.o \
              $(MSDK_DIR)/Libraries/MAX32665PeriphDriver/Source/mxc_delay.o
      else
        CFLAGS+=-DWOLFSSL_MAX3266X
        MAX3266X_CFLAGS:= \
          -I$(MSDK_DIR)/Libraries/PeriphDrivers/Include/MAX32665/ \
          -I$(MSDK_DIR)/Libraries/CMSIS/Device/Maxim/MAX32665/Include/ \
          -I$(MSDK_DIR)/Libraries/PeriphDrivers/Source/TPU/ \
          -I$(MSDK_DIR)/Libraries/PeriphDrivers/Source/SYS/ \
          -I$(MSDK_DIR)/Libraries/CMSIS/Include/
        CFLAGS+=$(MAX3266X_CFLAGS)
        OBJS+=$(MSDK_DIR)/Libraries/PeriphDrivers/Source/TPU/tpu_me14.o \
              $(MSDK_DIR)/Libraries/PeriphDrivers/Source/TPU/tpu_reva.o \
              $(MSDK_DIR)/Libraries/PeriphDrivers/Source/SYS/sys_me14.o \
              $(MSDK_DIR)/Libraries/PeriphDrivers/Source/SYS/mxc_delay.o
      endif
      WOLFCRYPT_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/maxim/max3266x.o
    endif
  endif

  ifeq ($(TARGET),pic32cz)
    ARCH_FLASH_OFFSET=0x08000000
    CORTEX_M7=1
    OBJS+=hal/pic32c.o

    ifeq ($(WOLFHSM_CLIENT),1)
      WOLFHSM_MICROCHIP_PIC32CZ ?= ..

      CFLAGS+=-I$(WOLFHSM_MICROCHIP_PIC32CZ) \
              -DWOLFHSM_CFG_NO_SYS_TIME \
              -DWOLFHSM_CFG_TRANSPORT_MEM \
              -DWOLFHSM_CFG_CLIENT_ID=WOLFBOOT_WOLFHSM_CLIENT_ID \
              -DPIC32CZ_CFG_SHARED_MEM_PHYS_BASE=0x20100000U \
              -DPIC32CZ_CFG_SHARED_MEM_REQ_SIZE=4096 \
              -DPIC32CZ_CFG_SHARED_MEM_RESP_SIZE=4096 \
              '-DPIC32CZ_CFG_SHARED_MEM_TOTAL_SIZE=(PIC32CZ_CFG_SHARED_MEM_REQ_SIZE+PIC32CZ_CFG_SHARED_MEM_RESP_SIZE)'

      OBJS+=$(WOLFHSM_MICROCHIP_PIC32CZ)/port/mailbox.o \
            $(WOLFHSM_MICROCHIP_PIC32CZ)/port/client/czhsm_client.o \
            $(WOLFHSM_MICROCHIP_PIC32CZ)/port/client/fwmetadata.o \
            $(WOLFBOOT_LIB_WOLFHSM)/src/wh_transport_mem.o

      # HSM server firmware. Optional: set HSM_FW_BIN to have wolfBoot load/boot
      # the HSM core from it at boot; leave it unset when the firmware is already
      # resident and wolfBoot must not touch it.
      ifneq ($(HSM_FW_BIN),)
        ifeq ($(wildcard $(HSM_FW_BIN)),)
          $(error HSM_FW_BIN=$(HSM_FW_BIN) not found: build the wolfHSM server \
                  firmware before wolfBoot)
        endif
        HSM_FW_ADDR?=0x0c1c0000
        HSM_FW_SIZE:=$(shell stat -c %s $(HSM_FW_BIN))
        CFLAGS+=-DHSM_FW_ADDR=$(HSM_FW_ADDR) -DHSM_FW_SIZE=$(HSM_FW_SIZE)
      endif

      # Signing pubkey header. Optional: set HSM_PUBKEY_HEADER to have the HAL
      # push the key into the HSM at boot; leave it unset when pre-provisioned.
      ifneq ($(HSM_PUBKEY_HEADER),)
        CFLAGS+=-DHSM_PUBKEY_HEADER='"$(HSM_PUBKEY_HEADER)"'
      endif
    endif
  endif

  ifeq ($(TARGET),pic32ck)
    ARCH_FLASH_OFFSET=0x08000000
    CORTEX_M33=1
    OBJS+=hal/pic32c.o
  endif

  ifeq ($(TARGET),stm32l4)
    SPI_TARGET=stm32
    ARCH_FLASH_OFFSET=0x08000000
    OBJS+=$(STM32CUBE)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o
    OBJS+=$(STM32CUBE)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o
    CFLAGS+=-DSTM32L4A6xx -DUSE_HAL_DRIVER -Isrc -Ihal \
      -I$(STM32CUBE)/Drivers/STM32L4xx_HAL_Driver/Inc/ \
      -I$(STM32CUBE)/Drivers/BSP/STM32L4xx_Nucleo_144/ \
      -I$(STM32CUBE)/Drivers/CMSIS/Device/ST/STM32L4xx/Include/ \
      -I$(STM32CUBE)/Drivers/CMSIS/Include/
  endif

  ifeq ($(TARGET),stm32f7)
    CORTEX_M7=1
    ARCH_FLASH_OFFSET=0x08000000
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32h7)
    CORTEX_M7=1
    ARCH_FLASH_OFFSET=0x08000000
    SPI_TARGET=stm32
  endif

  # Defaults for linker script placeholders (overridden when WOLFHAL=1)
  WOLFHAL_FLASH_EXCLUDE_TEXT?=*(.text*)
  WOLFHAL_FLASH_EXCLUDE_RODATA?=*(.rodata*)
  WOLFHAL_FLASH_RAM_SECTIONS?=

  ifeq ($(TARGET),stm32wb)
    ARCH_FLASH_OFFSET=0x08000000
    SPI_TARGET=stm32
    ifneq ($(PKA),0)
      PKA_EXTRA_OBJS+= $(STM32CUBE)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.o $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/st/stm32.o
      PKA_EXTRA_CFLAGS+=-DWOLFSSL_STM32WB -DWOLFSSL_STM32_PKA -DWOLFSSL_STM32_CUBEMX -DNO_STM32_HASH -DSTM32WB55xx
      PKA_EXTRA_CFLAGS+=-Isrc -Ihal \
          -I$(STM32CUBE)/Drivers/STM32WBxx_HAL_Driver/Inc \
          -I$(STM32CUBE)/Drivers/BSP/P-NUCLEO-WB55.Nucleo/ \
          -I$(STM32CUBE)/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
          -I$(STM32CUBE)/Drivers/STM32WBxx_HAL_Driver/Inc \
          -I$(STM32CUBE)/Drivers/CMSIS/Include
    endif
  endif

  ifeq ($(TARGET),stm32wba)
    CORTEX_M33=1
    ARCH_FLASH_OFFSET=0x08000000
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32l5)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x08000000
    ifeq ($(TZEN),1)
      WOLFBOOT_ORIGIN=0x0C000000
    else
      WOLFBOOT_ORIGIN=0x08000000
      LSCRIPT_IN=hal/$(TARGET)-ns.ld
    endif
  endif

  ifeq ($(TARGET),stm32u5)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x08000000
    ifeq ($(TZEN),1)
      WOLFBOOT_ORIGIN=0x0C000000
    else
      WOLFBOOT_ORIGIN=0x08000000
      LSCRIPT_IN=hal/$(TARGET)-ns.ld
    endif
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32u3)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x08000000
    WOLFBOOT_ORIGIN=0x08000000
    LSCRIPT_IN=hal/$(TARGET).ld
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32c5)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x08000000
    WOLFBOOT_ORIGIN=0x08000000
    LSCRIPT_IN=hal/$(TARGET).ld
    SPI_TARGET=stm32
  endif

  ifeq ($(TARGET),stm32h5)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x08000000
    ifeq ($(TZEN),1)
      WOLFBOOT_ORIGIN=0x0C000000
    else
      WOLFBOOT_ORIGIN=0x08000000
      LSCRIPT_IN=hal/$(TARGET)-ns.ld
    endif
    SPI_TARGET=stm32
    ifneq ($(DEBUG),0)
        CFLAGS+=-DPKCS11_SMALL
    endif

  endif

  ifeq ($(TARGET),stm32n6)
    CORTEX_M55=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x70000000
    # Boot ROM copies FSBL from NOR to AXISRAM2 at 0x34180400.
    # The signing -la flag in the flash script must match.
    WOLFBOOT_ORIGIN=0x34180400
    EXT_FLASH=1
    PART_UPDATE_EXT=1
    PART_SWAP_EXT=1
  endif

  ifeq ($(TARGET),rp2350)
    CORTEX_M33=1
    CFLAGS+=-Ihal
    ARCH_FLASH_OFFSET=0x10000000
    WOLFBOOT_ORIGIN=0x10000000
    ifeq ($(TZEN),1)
      LSCRIPT_IN=hal/$(TARGET).ld
    else
      LSCRIPT_IN=hal/$(TARGET)-ns.ld
    endif
    SPI_TARGET=raspberrypi_pico
    CFLAGS+=-DPICO_SDK_PATH=$(PICO_SDK_PATH)
    CFLAGS+=-I$(PICO_SDK_PATH)/src/common/pico_stdlib_headers/include
  endif

  ifeq ($(TARGET),rtl8735b)
     # RealTek RTL8735B SoC (Cortex-M33), e.g. the AmebaPro2 EVB. wolfBoot is
     # staged into SRAM by the RealTek bootloader and copies the verified app
     # from external SPI NOR into DDR before jumping (src/update_ram.c RAMBOOT).
     CORTEX_M33=1
     CFLAGS+=-Ihal
     # ASDK 10.3.0 toolchain (system arm-none-eabi-gcc clashes on newlib/lwip).
     CROSS_COMPILE:=$(ASDK_PATH)/arm-none-eabi-
     # Match the RealTek SDK FPU/ABI (-mfpu=fpv5-sp-d16 -mfloat-abi=softfp) so
     # linking the SDK libraries is consistent; wolfBoot enables the FPU at
     # hal_init before any SDK code runs.
     CFLAGS+=-mfpu=fpv5-sp-d16 -mfloat-abi=softfp
     LDFLAGS+=-mfpu=fpv5-sp-d16 -mfloat-abi=softfp
     UPDATE_OBJS:=src/update_ram.o
     CFLAGS+=-DWOLFBOOT_DUALBOOT
     CFLAGS+=-ffunction-sections -fdata-sections
     LDFLAGS+=-Wl,--gc-sections
     # Flash/UART/cache backend: "sdk" (default, RealTek SDK drivers) or "bare"
     # (smaller, no SDK dependency -- not yet implemented). See hal/rtl8735b.c.
     HAL_BACKEND?=sdk
     ifeq ($(HAL_BACKEND),sdk)
       CFLAGS+=-DHAL_BACKEND_SDK
       # The SDK backend folds the RealTek SDK driver chain into hal/rtl8735b.o.
       # Its objects.h pulls the SDK's "hal.h" (defines flash_t,
       # hal_audio_adapter_t, ...); wolfBoot also ships "hal.h". hal/rtl8735b.c
       # does not include wolfBoot's hal.h, and the SDK dirs are passed with
       # -iquote (searched before the global -I for quoted includes) so the SDK
       # objects.h "hal.h" resolves to the SDK one for THIS object only. sdk-shim
       # supplies a stub cmsis_os.h so the chain does not pull CMSIS-OS/FreeRTOS
       # (wolfBoot never calls it). The CONFIG_* defines mirror the bare-metal
       # bootloader build; -mcmse satisfies the SDK cache header (SCB_NS). The
       # rest of wolfBoot stays plain M33.
       HAL_SDK_IQUOTE=-iquote $(WOLFBOOT_ROOT)/hal/rtl8735b/sdk-shim \
               -iquote $(AMEBA_SDK)/component/mbed/hal_ext \
               -iquote $(AMEBA_SDK)/component/mbed/hal \
               -iquote $(AMEBA_SDK)/component/mbed/api \
               -iquote $(AMEBA_SDK)/component/mbed/targets/hal/rtl8735b \
               -iquote $(AMEBA_SDK)/component/soc/8735b/fwlib/rtl8735b/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/fwlib/rtl8735b/lib/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/cmsis/rtl8735b/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/cmsis/rtl8735b/lib/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/cmsis/cmsis-core/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/app/rtl_printf/include \
               -iquote $(AMEBA_SDK)/component/soc/8735b/app/stdio_port \
               -iquote $(AMEBA_SDK)/component/soc/8735b/misc/utilities/include \
               -iquote $(AMEBA_SDK)/component/os/os_dep/include
       # The same dirs as plain -I too, so angle-bracket includes (e.g. some
       # CMSIS-Core headers) resolve; -iquote only covers quoted includes.
       HAL_SDK_INC=$(patsubst -iquote,-I,$(HAL_SDK_IQUOTE))
       HAL_SDK_DEFS=-DCONFIG_PLATFORM_8735B -DCONFIG_RTL8735B_PLATFORM=1 \
               -DCONFIG_BUILD_RAM=1
       hal/rtl8735b.o: CFLAGS += $(HAL_SDK_IQUOTE) $(HAL_SDK_INC) $(HAL_SDK_DEFS) -mcmse
       # Final link also needs the SDK fwlib + ROM symbol table; point at the
       # prebuilt SDK lib/objects and ROM symbol linker file during bring-up:
       #   make TARGET=rtl8735b LIBS+=... LDFLAGS_EXTRA="-T<rom_symbol.ld>"
     else
       CFLAGS+=-DHAL_BACKEND_BARE
     endif
  endif

  ifeq ($(TARGET),sama5d3)
     CORTEX_A5=1
     UPDATE_OBJS:=src/update_ram.o
     CFLAGS+=-DWOLFBOOT_DUALBOOT -DEXT_FLASH -DNAND_FLASH -fno-builtin -ffreestanding
     CFLAGS+=-DWOLFBOOT_USE_STDLIBC
  endif

  ifeq ($(TARGET),zynq7000)
     # AMD/Xilinx Zynq-7000 (Cortex-A9, ARMv7-A) - ZC702 Evaluation Kit.
     # Loaded by Xilinx FSBL into DDR; see hal/zynq7000.{c,h,ld}.
     CORTEX_A9=1
     UPDATE_OBJS:=src/update_ram.o
     CFLAGS+=-DWOLFBOOT_DUALBOOT -fno-builtin -ffreestanding
     # Do NOT define WOLFBOOT_USE_STDLIBC: newlib's memcpy uses unaligned
     # LDRs which fault on ARMv7-A whenever the active mapping treats memory
     # as Strongly-Ordered (typically MMU off, but also some boot-stage
     # configurations). wolfBoot's startup keeps FSBL's MMU + flat 1:1
     # mapping enabled to avoid that, but we still link against the
     # aligned-safe memcpy in src/string.c so unaligned loads can never
     # surprise us regardless of MMU state.
     # Enable the legacy 64-byte uImage header strip unconditionally to
     # match sibling Xilinx targets (zynqmp, versal). update_ram.c
     # validates magic + ih_hcrc (header CRC32) + ih_size before
     # stripping, so a non-uImage payload whose first 4 bytes happen to
     # match UBOOT_IMG_HDR_MAGIC cannot be silently treated as a uImage
     # -- the additional CRC32 + size checks drop the joint false-
     # positive probability from ~2^-32 to ~2^-64, matching what U-Boot's
     # own mkimage/bootm does.
     CFLAGS+=-DWOLFBOOT_UBOOT_LEGACY
     # FPGA bitstream-from-FIT is supported via the DevC/PCAP DMA engine
     # (full bitstream). Enable with FPGA_BITSTREAM=1 (opt-in).
  endif

  ifeq ($(TARGET),va416x0)
    CFLAGS+=-I$(WOLFBOOT_ROOT)/hal/vorago/ \
            -I$(VORAGO_SDK_DIR)/common/drivers/hdr/ \
            -I$(VORAGO_SDK_DIR)/common/mcu/hdr/ \
            -I$(VORAGO_SDK_DIR)/common/utils/hdr/
    SDK_OBJS=$(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_spi.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_clkgen.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_ioconfig.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_irqrouter.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_uart.o \
             $(VORAGO_SDK_DIR)/common/drivers/src/va416xx_hal_timer.o \
             $(VORAGO_SDK_DIR)/common/mcu/src/system_va416xx.o
    ifeq ($(USE_HAL_SPI_FRAM),1)
      SDK_OBJS+=$(VORAGO_SDK_DIR)/common/utils/src/spi_fram.o
      CFLAGS+=-DUSE_HAL_SPI_FRAM
    endif
    OBJS+=$(SDK_OBJS)
  endif

## Cortex CPU

ifeq ($(CORTEX_A5),1)
  FPU=-mfpu=vfp4-d16
  CFLAGS+=-mcpu=cortex-a5  -mtune=cortex-a5 -static -z noexecstack \
		  -mno-unaligned-access
  LDLAGS+=-mcpu=cortex-a5 -mtune=cortex-a5  -mtune=cortex-a5 -static \
          -z noexecstack  -Ttext 0x300000
  # Cortex-A uses boot_arm32.o
  OBJS+=src/boot_arm32.o src/boot_arm32_start.o
  ifeq ($(NO_ASM),1)
    MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
  else
    MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_arm32.o
    ifneq ($(NO_ARM_ASM),1)
      OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-32-sha256-asm.o
      OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-32-sha256-asm_c.o
      CFLAGS+=-DWOLFSSL_SP_ARM32_ASM -DWOLFSSL_ARMASM -DWOLFSSL_ARMASM_NO_HW_CRYPTO \
              -DWOLFSSL_ARM_ARCH=7 -DWOLFSSL_ARMASM_INLINE -DWOLFSSL_ARMASM_NO_NEON
    endif
  endif
else
ifeq ($(CORTEX_A9),1)
  # Cortex-A9 (ARMv7-A, 32-bit) - Zynq-7000.
  # Build in ARM state (-marm); reset vector lands in ARM mode after FSBL.
  # Note: do not filter out -mthumb from CFLAGS/LDFLAGS - that converts the
  # variables to simple-expansion flavor and breaks lazy $(LSCRIPT) expansion
  # in test-app/Makefile. -marm appended later wins over -mthumb anyway.
  FPU=-mfpu=vfp3-d16
  CFLAGS+=-mcpu=cortex-a9 -mtune=cortex-a9 -marm -mno-unaligned-access
  LDFLAGS+=-mcpu=cortex-a9 -mtune=cortex-a9 -marm -static \
           -Wl,-z,noexecstack
  # Cortex-A9 uses the same generic ARMv7-A startup as Cortex-A5
  # (src/boot_arm32_start.S handles VBAR, per-mode stacks, cache
  # invalidate, async-abort enable for any ARMv7-A target).
  OBJS+=src/boot_arm32.o src/boot_arm32_start.o
  # Linux/U-Boot payload: enable MMU + FDT codepaths in update_ram.c so DTBs
  # can be loaded from a separate signed PART_DTS_BOOT partition. The MMU
  # itself stays inherited from FSBL's flat 1:1 mapping; wolfBoot does not
  # manage page tables on Cortex-A9.
  ifeq ($(MMU),1)
    CFLAGS+=-DMMU -DWOLFBOOT_FDT
    OBJS+=src/fdt.o
  endif
  # CRC32 helpers in src/gpt.c are reused by update_ram.c's uImage header
  # validator (WOLFBOOT_UBOOT_LEGACY), so link gpt.o for every Cortex-A9
  # build, not just the disk-boot variant below.
  OBJS+=src/gpt.o
  # SD card / eMMC boot: swap the update_ram loader for update_disk + GPT.
  # The SDHCI HAL hooks live in hal/zynq7000.c and translate the generic
  # Cadence-layout driver to the Arasan SDHCI v2.0 controller.
  ifneq ($(filter 1,$(DISK_SDCARD) $(DISK_EMMC)),)
    CFLAGS+=-DWOLFBOOT_UPDATE_DISK -DMAX_DISKS=1
    UPDATE_OBJS:=src/update_disk.o
    OBJS += src/disk.o
  endif
  ifeq ($(NO_ASM),1)
    MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
  else
    MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_arm32.o
    ifneq ($(NO_ARM_ASM),1)
      OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-32-sha256-asm.o
      OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/armv8-32-sha256-asm_c.o
      CFLAGS+=-DWOLFSSL_SP_ARM32_ASM -DWOLFSSL_ARMASM -DWOLFSSL_ARMASM_NO_HW_CRYPTO \
              -DWOLFSSL_ARM_ARCH=7 -DWOLFSSL_ARMASM_INLINE -DWOLFSSL_ARMASM_NO_NEON
    endif
  endif
else
  # All others use boot_arm.o
  OBJS+=src/boot_arm.o
  ifneq ($(NO_ARM_ASM),1)
    CORTEXM_ARM_EXTRA_OBJS= \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-aes-asm.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-aes-asm_c.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha256-asm.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha256-asm_c.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha512-asm.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha512-asm_c.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha3-asm.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-sha3-asm_c.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-chacha-asm.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/arm/thumb2-chacha-asm_c.o

    CORTEXM_ARM_EXTRA_CFLAGS+=-DWOLFSSL_ARMASM -DWOLFSSL_ARMASM_NO_HW_CRYPTO \
                              -DWOLFSSL_ARMASM_NO_NEON -DWOLFSSL_ARMASM_THUMB2
  endif
  ifeq ($(CORTEX_M55),1)
    CORTEX_M33=1
    CFLAGS+=-mcpu=cortex-m55 -DCORTEX_M55
    LDFLAGS+=-mcpu=cortex-m55
  endif
  ifeq ($(CORTEX_M33),1)
    CFLAGS+=-DCORTEX_M33
    ifneq ($(CORTEX_M55),1)
      CFLAGS+=-mcpu=cortex-m33
      LDFLAGS+=-mcpu=cortex-m33
    endif
    ifeq ($(TZEN),1)
      ifneq (,$(findstring stm32,$(TARGET)))
        ifneq ($(TARGET),stm32n6)
          OBJS+=hal/stm32_tz.o
        endif
      endif
      CFLAGS+=-mcmse
      SECURE_LDFLAGS+=-Wl,--cmse-implib -Wl,--out-implib=./src/wolfboot_tz_nsc.o
      ifeq ($(WOLFCRYPT_TZ),1)
        CORTEXM_ARM_EXTRA_OBJS=
        CORTEXM_ARM_EXTRA_CFLAGS=
        SECURE_OBJS+=./src/wc_callable.o
        WOLFCRYPT_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/random.o
        CFLAGS+=-DWOLFCRYPT_SECURE_MODE
      endif
    endif # TZEN=1
      ifeq ($(SPMATH),1)
        ifeq ($(NO_ASM),1)
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
        else
          CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_CORTEX_M_ASM
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_cortexm.o
          CFLAGS+=$(CORTEXM_ARM_EXTRA_CFLAGS) -DWOLFSSL_ARM_ARCH=8
          OBJS+=$(CORTEXM_ARM_EXTRA_OBJS)
        endif
      endif
    else
    ifeq ($(CORTEX_M7),1)
      CFLAGS+=-mcpu=cortex-m7
      LDFLAGS+=-mcpu=cortex-m7
      ifeq ($(SPMATH),1)
        ifeq ($(NO_ASM),1)
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
        else
          CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_CORTEX_M_ASM
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_cortexm.o
          CFLAGS+=$(CORTEXM_ARM_EXTRA_CFLAGS) -DWOLFSSL_ARM_ARCH=7
          OBJS+=$(CORTEXM_ARM_EXTRA_OBJS)
        endif
       endif
    else
    ifeq ($(CORTEX_M0),1)
        CFLAGS+=-mcpu=cortex-m0
        LDFLAGS+=-mcpu=cortex-m0
        ifeq ($(SPMATH),1)
          ifeq ($(NO_ASM),1)
            MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
          else
            CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_THUMB_ASM
            MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_armthumb.o
            # No ARMASM support available for ARMv6-M.
          endif
        endif
      else
        ifeq ($(CORTEX_M3),1)
          CFLAGS+=-mcpu=cortex-m3
          LDFLAGS+=-mcpu=cortex-m3
          ifeq ($(NO_ASM),1)
            ifeq ($(SPMATH),1)
              MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
            endif
          else
            ifeq ($(SPMATH),1)
              CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_CORTEX_M_ASM -DWOLFSSL_SP_NO_UMAAL
              MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_cortexm.o
              CFLAGS+=$(CORTEXM_ARM_EXTRA_CFLAGS) -DWOLFSSL_ARM_ARCH=7
              OBJS+=$(CORTEXM_ARM_EXTRA_OBJS)
            endif
          endif
      else
        # default Cortex M4
        CFLAGS+=-mcpu=cortex-m4
        LDFLAGS+=-mcpu=cortex-m4
        ifeq ($(NO_ASM),1)
          ifeq ($(SPMATH),1)
            MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
          endif
        else
          CFLAGS+=-fomit-frame-pointer # required with debug builds only
          ifeq ($(SPMATH),1)
            CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_CORTEX_M_ASM
            MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_cortexm.o
            CFLAGS+=$(CORTEXM_ARM_EXTRA_CFLAGS) -DWOLFSSL_ARM_ARCH=7
            OBJS+=$(CORTEXM_ARM_EXTRA_OBJS)
          endif
        endif
      endif
    endif
  endif
endif
endif
endif
endif

ifeq ($(WOLFHAL),1)
  WOLFHAL_ROOT?=$(WOLFBOOT_ROOT)/lib/wolfHAL
  CFLAGS+=-I$(WOLFHAL_ROOT) -Ihal/boards/$(BOARD)
endif


## Renesas RX
ifeq ($(ARCH),RENESAS_RX)
  RX_GCC_PATH?=~/toolchains/gcc_8.3.0.202311_rx_elf
  CROSS_COMPILE?=$(RX_GCC_PATH)/bin/rx-elf-

  ## Toolchain setup
  ifeq ($(USE_GCC),0)
    CC=$(CROSS_COMPILE)gcc
    # Must use LD directly (gcc link calls LD with sysroot and is not supported)
    LD=$(CROSS_COMPILE)ld
    AS=$(CROSS_COMPILE)gcc
    AR=$(CROSS_COMPILE)ar
    OBJCOPY?=$(CROSS_COMPILE)objcopy
    SIZE=$(CROSS_COMPILE)size

    # Override flags
    USE_GCC_HEADLESS=0
    LD_START_GROUP=--start-group
    LD_END_GROUP=--end-group
    CFLAGS+=-Wall -Wextra -ffreestanding -Wno-unused -nostartfiles -fno-common
    CFLAGS+=-ffunction-sections -fdata-sections
    CFLAGS+=-B$(dir $(CROSS_COMPILE))
    LDFLAGS+=-gc-sections -Map=wolfboot.map
    LDFLAGS+=-T $(LSCRIPT)
  endif

  # Renesas specific files
  OBJS+=src/boot_renesas.o src/boot_renesas_start.o hal/renesas-rx.o
  ifeq ($(SPMATH),1)
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
  endif

  # RX parts support big or little endian data depending on MDE register
  CFLAGS+=-fomit-frame-pointer -nofpu
  ifeq ($(BIG_ENDIAN),1)
    CFLAGS+=-mbig-endian-data
    ifeq ($(USE_GCC),1)
      LDFLAGS+=-Wl,--oformat=elf32-rx-be
      CFLAGS+=-misa=v2
    else
      LDFLAGS+=--oformat=elf32-rx-be
    endif
  else
    CFLAGS+=-mlittle-endian-data
    ifeq ($(USE_GCC),1)
      LDFLAGS+=-Wl,--oformat=elf32-rx-le
      CFLAGS+=-misa=v2
    else
      LDFLAGS+=--oformat=elf32-rx-le
    endif
  endif

  # ld is invoked directly, so add libgcc for the selected multilib (GNU RX
  # stores it per-endianness/-nofpu under lib/gcc/..., not in ../lib).
  ifeq ($(USE_GCC),0)
    LIBS+=$(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
  endif

  ifeq ($(PKA),1)
    CFLAGS+=-DWOLFBOOT_RENESAS_TSIP
    CFLAGS+=-DWOLFBOOT_DEVID_PUBKEY=7890
    CFLAGS+=-DWOLFBOOT_DEVID_CRYPT=7891
    # GCC RX 14.2 -Werror=enum-conversion trips on the wolfSSL TSIP port; add
    # the relaxation only if the compiler knows the warning (RX 8.3 does not).
    CFLAGS+=$(shell echo '' | $(CC) -xc -fsyntax-only \
        -Wno-error=enum-conversion - >/dev/null 2>&1 && echo -Wno-error=enum-conversion)
    RX_DRIVER_PATH?=./lib

    OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/cryptocb.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/Renesas/renesas_common.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/Renesas/renesas_tsip_util.o \
          $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/Renesas/renesas_tsip_aes.o

    # RX TSIP uses pre-compiled .a library by default
    ifneq ($(RX_TSIP_SRC),1)
      ifeq ($(TARGET),rx65n)
        ifeq ($(BIG_ENDIAN),1)
          LIBS+=$(RX_DRIVER_PATH)/r_tsip_rx/lib/gcc/libr_tsip_rx65n_big.a
        else
          LIBS+=$(RX_DRIVER_PATH)/r_tsip_rx/lib/gcc/libr_tsip_rx65n_little.a
        endif
      endif
      ifeq ($(TARGET),rx72n)
        ifeq ($(BIG_ENDIAN),1)
          LIBS+=$(RX_DRIVER_PATH)/r_tsip_rx/lib/gcc/libr_tsip_rx72m_rx72n_rx66n_big.a
        else
          LIBS+=$(RX_DRIVER_PATH)/r_tsip_rx/lib/gcc/libr_tsip_rx72m_rx72n_rx66n_little.a
        endif
      endif
    else
      CFLAGS+=-DRX_TSIP_SRC
      ifeq ($(TARGET),rx65n)
        RX_TSIP_SRC_PATH?=$(RX_DRIVER_PATH)/r_tsip_rx/src/targets/rx65n
      endif
      ifeq ($(TARGET),rx72n)
        RX_TSIP_SRC_PATH?=$(RX_DRIVER_PATH)/r_tsip_rx/src/targets/rx72m_rx72n_rx66n
      endif
      # Use RX_TSIP_SRC if building TSIP sources directly
      OBJS+=$(RX_TSIP_SRC_PATH)/r_tsip_rx.o \
            $(RX_TSIP_SRC_PATH)/r_tsip_rx_private.o \
            $(RX_TSIP_SRC_PATH)/r_tsip_aes_rx.o \
            $(RX_TSIP_SRC_PATH)/r_tsip_hash_rx.o \
            $(RX_TSIP_SRC_PATH)/r_tsip_ecc_rx.o \
            $(RX_TSIP_SRC_PATH)/ip/s_flash.o \
            $(patsubst %.c,%.o,$(wildcard $(RX_TSIP_SRC_PATH)/ip/r_tsip_rx_p*.c)) \
            $(patsubst %.c,%.o,$(wildcard $(RX_TSIP_SRC_PATH)/ip/r_tsip_rx_subprc*.c)) \
            $(patsubst %.c,%.o,$(wildcard $(RX_TSIP_SRC_PATH)/ip/r_tsip_rx_function*.c))

      # Ignore sign compare warnings in TSIP RX driver
      CFLAGS+=-Wno-error=sign-compare
    endif

    OBJS+=$(RX_DRIVER_PATH)/r_bsp/mcu/all/r_bsp_cpu.o \
          $(RX_DRIVER_PATH)/r_bsp/mcu/all/r_bsp_interrupts.o \
          $(RX_DRIVER_PATH)/r_bsp/mcu/all/r_rx_intrinsic_functions.o
    ifeq ($(TARGET),rx65n)
      OBJS+=$(RX_DRIVER_PATH)/r_bsp/mcu/rx65n/mcu_interrupts.o
    endif
    ifeq ($(TARGET),rx72n)
      OBJS+=$(RX_DRIVER_PATH)/r_bsp/mcu/rx72n/mcu_interrupts.o
    endif

    CFLAGS+=-Ihal -I$(WOLFBOOT_LIB_WOLFSSL) \
            -I$(RX_DRIVER_PATH)/r_bsp \
            -I$(RX_DRIVER_PATH)/r_config \
            -I$(RX_DRIVER_PATH)/r_tsip_rx \
            -I$(RX_DRIVER_PATH)/r_tsip_rx/src
  endif
endif


## RISCV (32-bit)
ifeq ($(ARCH),RISCV)
  CROSS_COMPILE?=riscv32-unknown-elf-
  # GCC 12+ separated _zicsr (CSR instructions) and _zifencei (fence.i)
  # from the base "I" extension, requiring them to be listed explicitly in
  # the -march string.  Detect with compile-only tests (-c).
  #
  # IMPORTANT: these extensions are added to CFLAGS only (compilation).
  # They must NOT appear in LDFLAGS because GCC 15 decomposes the ISA
  # string (m→zmmul, a→zaamo+zalrsc, c→zca) producing an expanded
  # -march that has no matching multilib, causing a fatal error at
  # link time.  The base march is multilib-safe for all GCC versions.
  RISCV32_ZICSR := $(shell echo "void _start(void){}" | \
    $(CROSS_COMPILE)gcc -march=rv32imac_zicsr -mabi=ilp32 -c -x c - -o /dev/null 2>/dev/null && echo _zicsr)
  RISCV32_ZIFENCEI := $(shell echo "void _start(void){}" | \
    $(CROSS_COMPILE)gcc -march=rv32imac_zifencei -mabi=ilp32 -c -x c - -o /dev/null 2>/dev/null && echo _zifencei)
  CFLAGS+=-fno-builtin-printf -DUSE_M_TIME -g -nostartfiles -DARCH_RISCV
  # Compilation: extended march so assembler accepts CSR/fence.i
  CFLAGS+=-march=rv32imac$(RISCV32_ZICSR)$(RISCV32_ZIFENCEI) -mabi=ilp32 -mcmodel=medany
  # Linking: base march (no extension suffixes) for multilib lookup
  LDFLAGS+=-march=rv32imac -mabi=ilp32 -mcmodel=medany
  MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o

  # Prune unused functions and data
  CFLAGS +=-ffunction-sections -fdata-sections
  LDFLAGS+=-Wl,--gc-sections

  # Unified RISC-V boot code (32/64-bit via __riscv_xlen)
  OBJS+=src/boot_riscv_start.o src/boot_riscv.o src/vector_riscv.o
  ARCH_FLASH_OFFSET=0x20010000
endif

## RISCV64 (64-bit)
ifeq ($(ARCH),RISCV64)
  CROSS_COMPILE?=riscv64-unknown-elf-

  # M-mode vs S-mode configuration
  ifeq ($(RISCV_MMODE),1)
    # Machine Mode: Running directly from eNVM/L2 SRAM
    CFLAGS+=-DWOLFBOOT_RISCV_MMODE -DWOLFBOOT_DUALBOOT
    # Minimal SBI runtime: services S-mode ecalls / timer / IPI when booting
    # an S-mode OS (Linux).  Only built when WOLFBOOT_MMODE_SMODE_BOOT is set
    # (the file is an empty translation unit otherwise -- see src/riscv_sbi.c).
    ifneq (,$(findstring WOLFBOOT_MMODE_SMODE_BOOT,$(CFLAGS_EXTRA) $(CFLAGS)))
      OBJS+=src/riscv_sbi.o
    endif
    # Use M-mode specific linker script
    LSCRIPT_IN:=hal/$(TARGET)-m.ld
    # MPFS DDR init pulls LIBERO_SETTING_* values from a Libero/HSS-generated
    # fpga_design_config.h. Setting LIBERO_FPGA_CONFIG_DIR enables DDR init
    # and adds the directory to the include search path.
    ifneq ($(LIBERO_FPGA_CONFIG_DIR),)
      CFLAGS+=-DMPFS_DDR_INIT -I$(LIBERO_FPGA_CONFIG_DIR)
      # Generic Cadence DDR controller driver + the MPFS PHY/PLL/training
      # platform (split out of hal/mpfs250.c).
      OBJS+=src/ddr_cadence.o
      OBJS+=hal/mpfs250_ddr.o
      # FIT/FDT boot: the E51 M-mode DDR boot loads a signed Yocto fitImage
      # (kernel + dtb) from SD and hands the dtb to S-mode Linux, so enable
      # the FIT parser (fit_find_images/fit_load_image in src/fdt.c).  The
      # U54 S-mode build enables this in the RISCV_MMODE=0 branch below; the
      # E51 M-mode DDR build needs it here too (it is not full MMU, so the
      # do_boot dtb hand-off is gated on MMU || WOLFBOOT_FDT).
      CFLAGS+=-DWOLFBOOT_FDT
      OBJS+=src/fdt.o
    endif
  else
    # Supervisor Mode: Running under HSS
    CFLAGS+=-DWOLFBOOT_DUALBOOT
    ifeq ($(MPFS_L2LIM),1)
      # L2-LIM mode: wolfBoot in on-chip SRAM, loaded by HSS (no DDR)
      LSCRIPT_IN:=hal/$(TARGET)-hss.ld
    else
      # DDR mode (default): full MMU and FDT support
      CFLAGS+=-DMMU
    endif
  endif

  # If SD card or eMMC is enabled use update_disk loader with GPT support
  ifneq ($(filter 1,$(DISK_SDCARD) $(DISK_EMMC)),)
    CFLAGS+=-DWOLFBOOT_UPDATE_DISK -DMAX_DISKS=1
    UPDATE_OBJS:=src/update_disk.o
    OBJS += src/gpt.o
    OBJS += src/disk.o
  else
    # Use RAM-based update path for non-memory-mapped flash (SC SPI)
    # Images are loaded into RAM before execution
    UPDATE_OBJS?=src/update_ram.o
  endif

  # GCC 12+ extension detection (see RISCV 32-bit section above).
  # Extensions go in CFLAGS only; LDFLAGS uses the base march to avoid
  # GCC 15 multilib lookup failures from ISA string decomposition.
  RISCV64_ZICSR := $(shell echo "void _start(void){}" | \
    $(CROSS_COMPILE)gcc -march=rv64imafd_zicsr -mabi=lp64d -c -x c - -o /dev/null 2>/dev/null && echo _zicsr)
  RISCV64_ZIFENCEI := $(shell echo "void _start(void){}" | \
    $(CROSS_COMPILE)gcc -march=rv64imafd_zifencei -mabi=lp64d -c -x c - -o /dev/null 2>/dev/null && echo _zifencei)

  ifeq ($(RISCV_MMODE),1)
    # E51 core: rv64imac (no FPU, no crypto extensions)
    CFLAGS+=-march=rv64imac$(RISCV64_ZICSR)$(RISCV64_ZIFENCEI) -mabi=lp64 -mcmodel=medany
    LDFLAGS+=-march=rv64imac -mabi=lp64 -mcmodel=medany
  else
    # U54 cores: rv64gc (with FPU)
    CFLAGS+=-march=rv64imafd$(RISCV64_ZICSR)$(RISCV64_ZIFENCEI) -mabi=lp64d -mcmodel=medany
    LDFLAGS+=-march=rv64imafd -mabi=lp64d -mcmodel=medany

    # FDT support for DDR S-mode (not needed for L2-LIM bare-metal boot)
    ifneq ($(MPFS_L2LIM),1)
      CFLAGS+=-DWOLFBOOT_FDT
      OBJS+=src/fdt.o
    endif
  endif
  CFLAGS+=-fno-builtin-printf -DUSE_M_TIME -g -nostartfiles -DARCH_RISCV -DARCH_RISCV64

  # Prune unused functions and data
  CFLAGS +=-ffunction-sections -fdata-sections
  LDFLAGS+=-Wl,--gc-sections

  # Unified RISC-V boot code (32/64-bit via __riscv_xlen)
  OBJS+=src/boot_riscv_start.o src/boot_riscv.o src/vector_riscv.o

  ifeq ($(SPMATH),1)
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c64.o
  endif

  ifneq ($(NO_ASM),1)
    CFLAGS+=-DWOLFSSL_RISCV_ASM
    WOLFCRYPT_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/riscv/riscv-64-sha256.o \
                    $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/riscv/riscv-64-sha512.o \
                    $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/riscv/riscv-64-sha3.o \
                    $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/riscv/riscv-64-aes.o
  endif
endif

# powerpc
ifeq ($(ARCH),PPC)
  CROSS_COMPILE?=powerpc-linux-gnu-
  LDFLAGS+=-Wl,--build-id=none
  # Produce a fully-resolved static ELF (no dynamic relocations).
  # Required for JTAG probes that load ELFs but don't process relocations.
  CFLAGS+=-fno-pic -fno-pie
  LDFLAGS+=-no-pie
  CFLAGS+=-DARCH_PPC -DFAST_MEMCPY -ffreestanding -fno-tree-loop-distribute-patterns

  ifeq ($(DEBUG_UART),0)
    CFLAGS+=-fno-builtin-printf
  endif

  # Target-specific CPU flags
  ifeq ($(TARGET),nxp_t2080)
    CFLAGS+=-mcpu=e6500 -mno-altivec -mbss-plt
  else ifneq ($(filter nxp_t1024 nxp_t1040,$(TARGET)),)
    CFLAGS+=-mcpu=e5500
  endif

  # Prune unused functions and data
  CFLAGS+=-ffunction-sections -fdata-sections
  LDFLAGS+=-Wl,--gc-sections

  OBJS+=src/boot_ppc_start.o src/boot_ppc.o

  # CRC32 helpers in src/gpt.c are reused by update_ram.c's uImage header
  # validator (WOLFBOOT_UBOOT_LEGACY -> uboot_legacy_header_valid).
  OBJS+=src/gpt.o

  ifeq ($(SPMATH),1)
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
  endif

  ifneq ($(NO_ASM),1)
    # Use the SHA256/SHA512 and SP math assembly accelerations.
    # (wolfSSL PR 10767 added the SHA-512 PPC32 asm transform referenced by
    # sha512.c; --gc-sections prunes it when sha512.o is not linked, e.g. ED25519.)
    CFLAGS+=-DWOLFSSL_SP_PPC
    CFLAGS+=-DWOLFSSL_PPC32_ASM -DWOLFSSL_PPC32_ASM_INLINE
    #CFLAGS+=-DWOLFSSL_PPC32_ASM_SMALL
    MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/ppc32/ppc32-sha256-asm_c.o
    # Add the SHA-512 PPC32 asm object only if its source is present (wildcard):
    # PR 10767 provides it; older checkouts fall back to C sha512.
    MATH_OBJS+=$(patsubst %.c,%.o,$(wildcard $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/ppc32/ppc32-sha512-asm_c.c))
  endif
endif

ifeq ($(TARGET),kinetis)
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include
  CFLAGS+=\
      -DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1 -DNVM_FLASH_WRITEONCE=1
  OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o

  ifeq ($(MCUXSDK),1)
    CFLAGS+=\
      -I$(MCUXPRESSO)/drivers/flash \
      -I$(MCUXPRESSO)/drivers/sysmpu \
      -I$(MCUXPRESSO)/drivers/ltc \
      -I$(MCUXPRESSO)/drivers/port \
      -I$(MCUXPRESSO)/drivers/gpio

    OBJS+=\
      $(MCUXPRESSO)/drivers/flash/fsl_ftfx_flash.o \
      $(MCUXPRESSO)/drivers/flash/fsl_ftfx_cache.o \
      $(MCUXPRESSO)/drivers/flash/fsl_ftfx_controller.o
  else
    OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_ftfx_flash.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_ftfx_cache.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_ftfx_controller.o
  endif

  ## The following lines can be used to enable HW acceleration
  ifeq ($(MCUXPRESSO_CPU),MK82FN256VLL15)
    ifeq ($(PKA),1)
      PKA_EXTRA_CFLAGS+=-DFREESCALE_USE_LTC
      PKA_EXTRA_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/nxp/ksdk_port.o
      ifeq ($(MCUXSDK),1)
        PKA_EXTRA_OBJS+=$(MCUXPRESSO)/drivers/ltc/fsl_ltc.o
      else
        PKA_EXTRA_OBJS+=$(MCUXPRESSO_DRIVERS)/drivers/fsl_ltc.o
      endif
    endif
  endif
endif

ifeq ($(TARGET),kinetis_kl26)
  CORTEX_M0=1
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include
  CFLAGS+=\
      -DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1 -DNVM_FLASH_WRITEONCE=1
  CFLAGS+=-Wno-old-style-declaration
  OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_flash.o
  ifneq (,$(filter 1,$(DEBUG_UART) $(UART_FLASH)))
    OBJS+=$(MCUXPRESSO_DRIVERS)/drivers/fsl_lpsci.o
  endif
endif

ifeq ($(TARGET),mcxa)
  CORTEX_M33=1
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO_DRIVERS)/drivers/common \
      -I$(MCUXPRESSO_DRIVERS)/drivers/romapi \
      -I$(MCUXPRESSO_DRIVERS)/../periph \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include \
      -I$(MCUXPRESSO)/drivers/flash \
      -I$(MCUXPRESSO)/drivers/mcx_spc \
      -I$(MCUXPRESSO)/drivers/sysmpu \
      -I$(MCUXPRESSO)/drivers/ltc \
      -I$(MCUXPRESSO)/drivers/port \
      -I$(MCUXPRESSO)/drivers/gpio
  CFLAGS+=-DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
  CFLAGS+=-DWOLFSSL_SP_NO_UMAAL
  CFLAGS+=-Wno-old-style-declaration
  CFLAGS+=-mcpu=cortex-m33 -DCORTEX_M33 -U__ARM_FEATURE_DSP
  LDFLAGS+=-mcpu=cortex-m33
  OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO)/drivers/mcx_spc/fsl_spc.o \
      $(MCUXPRESSO_PROJECT_TEMPLATE)/clock_config.o
endif

ifeq ($(TARGET),mcxw)
  CORTEX_M33=1
  ifneq ($(TZEN),1)
    LSCRIPT_IN=hal/$(TARGET)-ns.ld
  endif
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO_DRIVERS)/drivers/romapi \
      -I$(MCUXPRESSO_DRIVERS)/../periph2 \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/flash_k4 \
      -I$(MCUXPRESSO)/drivers/ccm32k \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include \
      -I$(MCUXPRESSO)/drivers/flash \
      -I$(MCUXPRESSO)/drivers/spc \
      -I$(MCUXPRESSO)/drivers/sysmpu \
      -I$(MCUXPRESSO)/drivers/ltc \
      -I$(MCUXPRESSO)/drivers/port \
      -I$(MCUXPRESSO)/drivers/gpio
  CFLAGS+=-DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
  CFLAGS+=-DWOLFSSL_SP_NO_UMAAL
  CFLAGS+=-Wno-old-style-declaration
  CFLAGS+=-mcpu=cortex-m33 -DCORTEX_M33 -U__ARM_FEATURE_DSP
  LDFLAGS+=-mcpu=cortex-m33
  OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO)/drivers/spc/fsl_spc.o \
      $(MCUXPRESSO_PROJECT_TEMPLATE)/clock_config.o \
      $(MCUXPRESSO)/drivers/ccm32k/fsl_ccm32k.o \
      $(MCUXPRESSO_DRIVERS)/drivers/romapi/fsl_romapi.o
endif

ifeq ($(TARGET),mcxn)
  CORTEX_M33=1
  ifneq ($(TZEN),1)
    LSCRIPT_IN=hal/$(TARGET)-ns.ld
  endif
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO_DRIVERS)/drivers/romapi/flash \
      -I$(MCUXPRESSO_DRIVERS)/../periph \
      -I$(MCUXPRESSO) \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/gpio \
      -I$(MCUXPRESSO)/drivers/port \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO)/drivers/lpflexcomm \
      -I$(MCUXPRESSO)/drivers/lpuart \
      -I$(MCUXPRESSO_PROJECT_TEMPLATE) \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include
  CFLAGS+=-DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
  CFLAGS+=-Wno-old-style-declaration
  CFLAGS+=-mcpu=cortex-m33 -DCORTEX_M33 -U__ARM_FEATURE_DSP
  LDFLAGS+=-mcpu=cortex-m33
  OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO_PROJECT_TEMPLATE)/clock_config.o \
      $(MCUXPRESSO_DRIVERS)/drivers/romapi/flash/src/fsl_flash.o

  ifeq ($(DEBUG_UART),1)
    OBJS+=\
      $(MCUXPRESSO)/drivers/lpflexcomm/fsl_lpflexcomm.o \
      $(MCUXPRESSO)/drivers/lpuart/fsl_lpuart.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_reset.o
  endif

  # Link ELS PKC only when -DWOLFBOOT_DICE_HW is emitted (WOLFCRYPT_TZ_PSA=1 in options.mk).
  ifeq ($(WOLFCRYPT_TZ_PSA),1)
  ifeq ($(WOLFBOOT_DICE_HW),1)
    ELS_PKC=$(MCUXPRESSO)/components/els_pkc
    CFLAGS+=\
      -I$(ELS_PKC)/includes \
      -I$(ELS_PKC)/src/comps/mcuxClEls/inc \
      -I$(ELS_PKC)/src/platforms/mcxn \
      -I$(ELS_PKC)/src/platforms/mcxn/inc
    OBJS+=\
      $(ELS_PKC)/src/comps/mcuxClEls/src/mcuxClEls_Common.o \
      $(ELS_PKC)/src/comps/mcuxClEls/src/mcuxClEls_Kdf.o \
      $(ELS_PKC)/src/comps/mcuxClEls/src/mcuxClEls_KeyManagement.o \
      $(ELS_PKC)/src/comps/mcuxClEls/src/mcuxClEls_Ecc.o
  endif
  endif
endif

ifeq ($(TARGET),nrf5340)
  ifneq ($(TZEN), 1)
    LSCRIPT_IN=hal/$(TARGET)-ns.ld
  endif
endif

ifeq ($(TARGET),nrf54l)
  ifneq ($(TZEN), 1)
    LSCRIPT_IN=hal/$(TARGET)-ns.ld
  endif
endif

ifeq ($(TARGET),nrf5340_net)
  # Net core doesn't support DSP and FP
  CFLAGS+=-mcpu=cortex-m33+nodsp+nofp
  LDFLAGS+=-mcpu=cortex-m33+nodsp+nofp
endif

ifeq ($(TARGET),imx_rt)
  CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/cache/armv7-m7 \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO)/drivers/flexspi \
      -I$(MCUXPRESSO)/drivers/lpuart \
      -I$(MCUXPRESSO)/drivers/igpio \
      -I$(MCUXPRESSO)/components/uart \
      -I$(MCUXPRESSO)/components/flash/nor \
      -I$(MCUXPRESSO)/components/flash/nor/flexspi \
      -I$(MCUXPRESSO)/components/serial_manager \
      -I$(MCUXPRESSO_DRIVERS)/project_template \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include
  CFLAGS+=\
      -DCPU_$(MCUXPRESSO_CPU) \
      -DDEBUG_CONSOLE_ASSERT_DISABLE=1 \
      -DXIP_EXTERNAL_FLASH=1 -DDEBUG_CONSOLE_ASSERT_DISABLE=1 -DPRINTF_ADVANCED_ENABLE=1 \
      -DSCANF_ADVANCED_ENABLE=1 -DSERIAL_PORT_TYPE_UART=1 -DNDEBUG=1

  ifeq ($(MCUXSDK),1)
    CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS)/../periph \
      -I$(MCUXPRESSO)/components/debug_console \
      -I$(MCUXPRESSO)/components/debug_console/config \
      -I$(MCUXPRESSO)/components/lists \
      -I$(MCUXPRESSO)/components/str
    CFLAGS+=-DDCB=CoreDebug -DDCB_DEMCR_TRCENA_Msk=CoreDebug_DEMCR_TRCENA_Msk
    OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO)/drivers/flexspi/fsl_flexspi.o \
      $(MCUXPRESSO)/drivers/cache/armv7-m7/fsl_cache.o
    ifeq ($(DEBUG_UART),1)
      OBJS+= $(MCUXPRESSO)/drivers/lpuart/fsl_lpuart.o
    endif
  else
    CFLAGS+=\
      -I$(MCUXPRESSO_DRIVERS)/utilities/str \
      -I$(MCUXPRESSO_DRIVERS)/utilities/debug_console
    OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_flexspi.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_cache.o
    ifeq ($(DEBUG_UART),1)
      OBJS+= $(MCUXPRESSO_DRIVERS)/drivers/fsl_lpuart.o
    endif
  endif

  ifeq ($(TARGET_IMX_HAB),1)
      LSCRIPT_IN:=hal/$(TARGET)_hab.ld
  else
      LSCRIPT_IN:=hal/$(TARGET).ld
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1064DVL6A)
    ARCH_FLASH_OFFSET=0x70000000
    ifeq ($(MCUXSDK),1)
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1064/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1064
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1064/project_template
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkmimxrt1064/xip/
    endif
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1062DVL6A)
    ARCH_FLASH_OFFSET=0x60000000
    ifeq ($(MCUXSDK),1)
      # Use evkbmimxrt1060 because evkmimxrt1060 is not supported by the SDK
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/project_template
      CFLAGS+=-I$(MCUXPRESSO)/devices/RT/RT1050/MIMXRT1052
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkmimxrt1060/xip/
    endif
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1062DVL6B)
    ARCH_FLASH_OFFSET=0x60000000
    ifeq ($(MCUXSDK),1)
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/project_template
      CFLAGS+=-I$(MCUXPRESSO)/devices/RT/RT1050/MIMXRT1052
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkbmimxrt1060/xip/
    endif
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1061CVJ5B)
    ARCH_FLASH_OFFSET=0x60000000
    ifeq ($(MCUXSDK),1)
      # Use evkbmimxrt1060 because evkmimxrt1060 is not supported by the SDK
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbmimxrt1060/project_template
      CFLAGS+=-I$(MCUXPRESSO)/devices/RT/RT1050/MIMXRT1052
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkmimxrt1060/xip/
    endif
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1052DVJ6B)
    ARCH_FLASH_OFFSET=0x60000000
    ifeq ($(MCUXSDK),1)
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbimxrt1050/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbimxrt1050
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkbimxrt1050/project_template
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkbimxrt1050/xip/
    endif
  endif

  ifeq ($(MCUXPRESSO_CPU),MIMXRT1042XJM5B)
    ARCH_FLASH_OFFSET=0x60000000
    ifeq ($(MCUXSDK),1)
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1040/xip/
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1040
      CFLAGS+=-I$(MCUXPRESSO)/examples/_boards/evkmimxrt1040/project_template
      CFLAGS+=-I$(MCUXPRESSO)/devices/RT/RT1050/MIMXRT1052
    else
      CFLAGS+=-I$(MCUXPRESSO)/boards/evkmimxrt1040/xip/
    endif
  endif

  ifeq ($(PKA),1)
    ifeq ($(MCUXSDK),1)
      PKA_EXTRA_OBJS+= $(MCUXPRESSO)/drivers/dcp/fsl_dcp.o
    else
      PKA_EXTRA_OBJS+= $(MCUXPRESSO_DRIVERS)/drivers/fsl_dcp.o
    endif
    PKA_EXTRA_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/nxp/dcp_port.o
    PKA_EXTRA_CFLAGS+=\
        -DWOLFSSL_IMXRT_DCP \
        -I$(MCUXPRESSO)/drivers/cache/armv7-m7 \
        -I$(MCUXPRESSO)/drivers/dcp
  endif
endif

# ARM Big Endian
ifeq ($(ARCH),ARM_BE)
  OBJS+=src/boot_arm.o
  ifeq ($(SPMATH),1)
    MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
  endif
endif

ifneq ($(filter nxp_t1024 nxp_t1040,$(TARGET)),)
  # Power PC big endian (e5500 core, T1024 2-core / T1040 4-core)
  ARCH_FLAGS=-mhard-float -mcpu=e5500
  CFLAGS+=$(ARCH_FLAGS)
  BIG_ENDIAN=1
  CFLAGS+=-DMMU -DWOLFBOOT_FDT -DWOLFBOOT_DUALBOOT
  CFLAGS+=-pipe # use pipes instead of temp files
  CFLAGS+=-feliminate-unused-debug-types
  LDFLAGS+=$(ARCH_FLAGS)
  LDFLAGS+=-Wl,--hash-style=both # generate both sysv and gnu symbol hash table
  LDFLAGS+=-Wl,--as-needed # remove weak functions not used
  OBJS+=src/boot_ppc_mp.o # support for spin table
  OBJS+=src/fdt.o
  OBJS+=src/pci.o
  CFLAGS+=-DWOLFBOOT_USE_PCI
  UPDATE_OBJS:=src/update_ram.o

  SPI_TARGET=nxp
  OPTIMIZATION_LEVEL=0 # using default -Os causes issues with alignment
endif

ifeq ($(TARGET),nxp_t2080)
  # Power PC big endian
  ARCH_FLAGS=-mhard-float -mcpu=e6500
  CFLAGS+=$(ARCH_FLAGS)
  BIG_ENDIAN=1
  CFLAGS+=-DMMU -DWOLFBOOT_FDT -DWOLFBOOT_DUALBOOT
  # Support U-Boot legacy uImage header: strip 64-byte header before jumping
  # to the OS image (e.g. uVxWorks, uImage Linux kernel).
  CFLAGS+=-DWOLFBOOT_UBOOT_LEGACY
  # 64-bit OS support (VxWorks 7, Linux 64-bit): transitions LAW/TLB to
  # 36-bit physical addressing before jumping to the OS. Equivalent to
  # CW U-Boot "ossel ostype2". Set OS_64BIT=1 in .config to enable.
  ifeq ($(OS_64BIT),1)
    CFLAGS+=-DENABLE_OS64BIT
  endif
  ifneq ($(WOLFBOOT_BOOTARGS),)
    CFLAGS+=-DWOLFBOOT_BOOTARGS='"$(WOLFBOOT_BOOTARGS)"'
  endif
  CFLAGS+=-pipe # use pipes instead of temp files
  CFLAGS+=-feliminate-unused-debug-types
  LDFLAGS+=$(ARCH_FLAGS)
  LDFLAGS+=-Wl,--hash-style=both # generate both sysv and gnu symbol hash table
  LDFLAGS+=-Wl,--as-needed # remove weak functions not used
  OBJS+=src/boot_ppc_mp.o # support for spin table
  OBJS+=src/fdt.o
  OBJS+=src/pci.o
  CFLAGS+=-DWOLFBOOT_USE_PCI
  UPDATE_OBJS:=src/update_ram.o
endif

ifeq ($(TARGET),nxp_p1021)
  # Power PC big endian
  ARCH_FLAGS=-m32 -mhard-float -mcpu=e500mc
  ARCH_FLAGS+=-fno-builtin -ffreestanding -nostartfiles
  CFLAGS+=$(ARCH_FLAGS)
  BIG_ENDIAN=1
  CFLAGS+=-DWOLFBOOT_DUALBOOT
  CFLAGS+=-pipe # use pipes instead of temp files
  LDFLAGS+=$(ARCH_FLAGS)
  LDFLAGS+=-Wl,--as-needed # remove weak functions not used
  OBJS+=src/boot_ppc_mp.o # support for spin table
  UPDATE_OBJS:=src/update_ram.o

  # Use PPC stdlib for memcpy, etc.
  #CFLAGS+=-DWOLFBOOT_USE_STDLIBC

  SPI_TARGET=nxp
endif

ifeq ($(TARGET),ti_hercules)
  # HALCoGen Source and Include?
  CORTEX_R5=1
  CFLAGS+=-D"CORTEX_R5" -D"NVM_FLASH_WRITEONCE" -D"FLASHBUFFER_SIZE=32"
  BIG_ENDIAN=1
  STACK_USAGE=0
  USE_GCC=0
  USE_GCC_HEADLESS=0

  ifeq ($(CCS_ROOT),)
    $(error "CCS_ROOT must be defined to root of tools")
  endif
  CROSS_COMPILE?=$(CCS_ROOT)/bin/

  CC=$(CROSS_COMPILE)armcl
  LD=$(CROSS_COMPILE)armcl
  AS=$(CROSS_COMPILE)armasm
  AR=$(CROSS_COMPILE)armcl -ar
  OBJCOPY=$(CROSS_COMPILE)armobjcopy
  SIZE=$(CROSS_COMPILE)armsize
  OUTPUT_FLAG=--output_file

  F021_DIR?=c:\\ti\\Hercules\\F021\ Flash\ API\\02.01.01

  ARCH_FLAGS=-mv7R5 --code_state=32 --float_support=VFPv3D16 --enum_type=packed --abi=eabi -I"$(CCS_ROOT)/include" -I"$(F021_DIR)/include"
  CFLAGS+=$(ARCH_FLAGS)
  LDFLAGS+=$(ARCH_FLAGS) -i"$(CCS_ROOT)/lib" -i"$(F021_DIR)" -z --be32 --map_file=wolfboot.map --reread_libs --diag_wrap=off --display_error_number --warn_sections --heap_size=0 --stack_size=0x800 --ram_model
  LD_START_GROUP= #--start-group
  LD_END_GROUP= -llibc.a -l"$(F021_DIR)/F021_API_CortexR4_BE_L2FMC_V3D16.lib"

  OPTIMIZATION_LEVEL=2
endif

ifeq ($(TARGET),lpc)
  ifeq ($(MCUXSDK),1)
    # Some targets in the SDK use drivers from a different target
    MCUXPRESSO_DRIVERS_SHARED?=$(MCUXPRESSO_DRIVERS)
    ifneq (,$(filter LPC54628%,$(MCUXPRESSO_CPU)))
      MCUXPRESSO_DRIVERS_SHARED=$(MCUXPRESSO)/devices/LPC/LPC54000/LPC54628
    else ifneq (,$(filter LPC54605% LPC54606% LPC54607% LPC54608% LPC54616% LPC54618%,$(MCUXPRESSO_CPU)))
      MCUXPRESSO_DRIVERS_SHARED=$(MCUXPRESSO)/devices/LPC/LPC54000/LPC54608
    else ifneq (,$(filter LPC54018M% LPC54S018M%,$(MCUXPRESSO_CPU)))
      MCUXPRESSO_DRIVERS_SHARED=$(MCUXPRESSO)/devices/LPC/LPC54000/LPC54S018M
    else ifneq (,$(filter LPC54005% LPC54016% LPC54018% LPC54S005% LPC54S016% LPC54S018%,$(MCUXPRESSO_CPU)))
      MCUXPRESSO_DRIVERS_SHARED=$(MCUXPRESSO)/devices/LPC/LPC54000/LPC54S018
    endif
    CFLAGS+=\
        -I$(MCUXPRESSO_DRIVERS) \
        -I$(MCUXPRESSO_DRIVERS_SHARED)/drivers \
        -I$(MCUXPRESSO_DRIVERS)/../periph \
        -I$(MCUXPRESSO)/drivers \
        -I$(MCUXPRESSO)/drivers/common \
        -I$(MCUXPRESSO)/drivers/flashiap \
        -I$(MCUXPRESSO_CMSIS)/Include \
        -I$(MCUXPRESSO_CMSIS)/Core/Include
    CFLAGS+=\
        -DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
    CFLAGS+=-DDCB=CoreDebug -DDCB_DEMCR_TRCENA_Msk=CoreDebug_DEMCR_TRCENA_Msk
    OBJS+=\
        $(MCUXPRESSO_DRIVERS_SHARED)/drivers/fsl_clock.o \
        $(MCUXPRESSO_DRIVERS_SHARED)/drivers/fsl_power.o \
        $(MCUXPRESSO_DRIVERS_SHARED)/drivers/fsl_reset.o
    CFLAGS+=\
      -I$(MCUXPRESSO)/drivers/flashiap \
      -I$(MCUXPRESSO)/drivers/flexcomm
    OBJS+=\
      $(MCUXPRESSO)/drivers/common/fsl_common.o \
      $(MCUXPRESSO)/drivers/common/fsl_common_arm.o \
      $(MCUXPRESSO)/drivers/flashiap/fsl_flashiap.o \
      $(MCUXPRESSO)/drivers/flexcomm/usart/fsl_usart.o \
      $(MCUXPRESSO)/drivers/flexcomm/fsl_flexcomm.o
  else
    CFLAGS+=\
        -I$(MCUXPRESSO_DRIVERS) \
        -I$(MCUXPRESSO_DRIVERS)/drivers \
        -I$(MCUXPRESSO)/drivers \
        -I$(MCUXPRESSO)/drivers/common \
        -I$(MCUXPRESSO_CMSIS)/Include \
        -I$(MCUXPRESSO_CMSIS)/Core/Include
    CFLAGS+=\
        -DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
    OBJS+=\
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_power.o \
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_reset.o
    LIBS+=\
        $(MCUXPRESSO_DRIVERS)/mcuxpresso/libpower_softabi.a
    OBJS+=\
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_common.o \
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_flashiap.o \
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_usart.o \
        $(MCUXPRESSO_DRIVERS)/drivers/fsl_flexcomm.o
  endif
endif

ifeq ($(TARGET),nxp_lpc54s0xx)
  ARCH_FLASH_OFFSET=0x10000000
  LDFLAGS+=-Wl,--no-warn-rwx-segments
  # Bare-metal HAL — no NXP SDK dependencies
endif

ifeq ($(TARGET),lpc55s69)
  ifneq ($(TZEN),1)
    LSCRIPT_IN=hal/$(TARGET)-ns.ld
  endif
  CFLAGS+=\
      -I$(MCUXPRESSO_PROJECT_TEMPLATE) \
      -I$(MCUXPRESSO_DRIVERS) \
      -I$(MCUXPRESSO_DRIVERS)/drivers \
      -I$(MCUXPRESSO_DRIVERS)/../periph \
      -I$(MCUXPRESSO)/drivers \
      -I$(MCUXPRESSO)/drivers/casper \
      -I$(MCUXPRESSO)/drivers/common \
      -I$(MCUXPRESSO)/drivers/flexcomm \
      -I$(MCUXPRESSO)/drivers/flexcomm/usart \
      -I$(MCUXPRESSO)/drivers/hashcrypt \
      -I$(MCUXPRESSO)/drivers/iap1 \
      -I$(MCUXPRESSO)/drivers/lpc_gpio \
      -I$(MCUXPRESSO)/drivers/lpc_iocon \
      -I$(MCUXPRESSO)/drivers/rng_1 \
      -I$(MCUXPRESSO_CMSIS)/Include \
      -I$(MCUXPRESSO_CMSIS)/Core/Include
  CFLAGS+=-DWOLFSSL_NXP_RNG_1
  CFLAGS+=-DCPU_$(MCUXPRESSO_CPU)
  CFLAGS+=-DFSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL=1
  CFLAGS+=-DFSL_SDK_DISABLE_DRIVER_RESET_CONTROL=1
  CFLAGS+=-mcpu=cortex-m33 -DCORTEX_M33 -U__ARM_FEATURE_DSP
  LDFLAGS+=-mcpu=cortex-m33 -Wl,--no-warn-rwx-segments
  OBJS+=\
      $(MCUXPRESSO_PROJECT_TEMPLATE)/clock_config.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_power.o \
      $(MCUXPRESSO)/drivers/common/fsl_common_arm.o \
      $(MCUXPRESSO)/drivers/iap1/fsl_iap.o \
      $(MCUXPRESSO)/drivers/lpc_gpio/fsl_gpio.o \
      $(MCUXPRESSO)/drivers/rng_1/fsl_rng.o
  ifeq ($(DEBUG_UART),1)
    OBJS+=\
      $(MCUXPRESSO_DRIVERS)/drivers/fsl_reset.o \
      $(MCUXPRESSO)/drivers/flexcomm/fsl_flexcomm.o \
      $(MCUXPRESSO)/drivers/flexcomm/usart/fsl_usart.o
  endif
  ifeq ($(PKA),1)
    CFLAGS+=-DWOLFSSL_NXP_LPC55S6X
    OBJS+=\
        $(MCUXPRESSO)/drivers/casper/fsl_casper.o \
        $(MCUXPRESSO)/drivers/hashcrypt/fsl_hashcrypt.o \
        $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/nxp/casper_port.o \
        $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/nxp/hashcrypt_port.o
  endif
endif

ifeq ($(TARGET),psoc6)
    CORTEX_M0=1
    OBJS+=\
        $(CYPRESS_PDL)/drivers/source/cy_flash.o \
        $(CYPRESS_PDL)/drivers/source/cy_ipc_pipe.o \
        $(CYPRESS_PDL)/drivers/source/cy_ipc_sema.o \
        $(CYPRESS_PDL)/drivers/source/cy_ipc_drv.o \
        $(CYPRESS_PDL)/drivers/source/cy_device.o \
        $(CYPRESS_PDL)/drivers/source/cy_sysclk.o \
        $(CYPRESS_PDL)/drivers/source/cy_sysint.o \
        $(CYPRESS_PDL)/drivers/source/cy_syslib.o \
        $(CYPRESS_PDL)/drivers/source/cy_ble_clk.o \
        $(CYPRESS_PDL)/drivers/source/cy_wdt.o \
        $(CYPRESS_PDL)/drivers/source/TOOLCHAIN_GCC_ARM/cy_syslib_gcc.o \
        $(CYPRESS_PDL)/devices/templates/COMPONENT_MTB/COMPONENT_CM0P/system_psoc6_cm0plus.o
    PSOC6_CRYPTO_OBJS=\
        $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/port/cypress/psoc6_crypto.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_vu.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_ecc_domain_params.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_ecc_nist_p.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_ecc_ecdsa.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_sha_v2.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_sha_v1.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_mem_v2.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_mem_v1.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_hw.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto_core_hw_v1.o \
        $(CYPRESS_PDL)/drivers/source/cy_crypto.o

    CFLAGS+=\
        -I$(CYPRESS_PDL)/devices/include \
        -I$(CYPRESS_PDL)/drivers/include \
        -I$(CYPRESS_PDL)/cmsis/include \
        -I$(CYPRESS_TARGET_LIB) \
        -I$(CYPRESS_CORE_LIB)/include \
        -I$(CYPRESS_PDL)/devices/include/ip \
        -I$(CYPRESS_PDL)/devices/templates/COMPONENT_MTB \
        -DCY8C624ABZI_D44
    ARCH_FLASH_OFFSET=0x10000000
    ifneq ($(PSOC6_CRYPTO),0)
        CFLAGS+=-DWOLFSSL_PSOC6_CRYPTO
        OBJS+=$(PSOC6_CRYPTO_OBJS)
    endif
endif

ifeq ($(USE_CLANG),1)
  ifneq ($(ARCH),ARM)
    $(error USE_CLANG=1 is currently supported only for ARCH=ARM)
  endif
  CLANG?=clang
  CLANG_GCC_NAME?=$(CROSS_COMPILE)gcc
  CLANG_TARGET?=arm-none-eabi
  CLANG_DRIVER:=$(CLANG) --target=$(CLANG_TARGET) -ccc-gcc-name $(CLANG_GCC_NAME)
  CLANG_LIBC_A?=$(shell $(CLANG_GCC_NAME) -print-file-name=libc.a)
  CLANG_NEWLIB_INCLUDE?=$(abspath $(dir $(CLANG_LIBC_A))/../include)

  CC=$(CLANG_DRIVER)
  LD=$(CLANG_DRIVER) -fuse-ld=lld
  AS=$(CLANG_DRIVER)
  AR=llvm-ar
  OBJCOPY?=llvm-objcopy
  SIZE=llvm-size

  CFLAGS+=-isystem $(CLANG_NEWLIB_INCLUDE)
  CFLAGS+=-DWOLFSSL_NO_ATOMIC -DWOLFSSL_NO_ATOMICS
  # newlib's <stdatomic.h> is unusable under clang for arm-none-eabi (references
  # int_leastN_t before they are declared); skip it so wc_port.h falls back to
  # the __atomic_thread_fence compiler builtin
  CFLAGS+=-DNO_STDATOMIC_H
  CFLAGS+=-Wno-unknown-attributes -Wno-error=unknown-attributes
  CFLAGS+=-fno-unwind-tables -fno-asynchronous-unwind-tables
  LDFLAGS+=-nostdlib
endif

ifeq ($(USE_ARMCLANG),1)
  ifneq ($(ARCH),ARM)
    $(error USE_ARMCLANG=1 is currently supported only for ARCH=ARM)
  endif
  ARMCLANG_PATH?=
  CC=$(ARMCLANG_PATH)armclang --target=arm-arm-none-eabi
  AS=$(CC)
  LD=$(ARMCLANG_PATH)armlink
  AR=$(ARMCLANG_PATH)armar
  FROMELF?=$(ARMCLANG_PATH)fromelf
  SIZE=$(FROMELF) -z
  OBJCOPY=FROMELF="$(FROMELF)" $(WOLFBOOT_ROOT)/tools/armclang/objcopy.sh

  CFLAGS+=-mfloat-abi=soft
  CFLAGS+=-fno-unwind-tables -fno-asynchronous-unwind-tables
  CFLAGS+=-Wno-unknown-attributes -Wno-error=unknown-attributes

  # Map scatter files region names to GNU ld symbols used by wolfBoot code
  CFLAGS+=-D'_start_text=Image$$$$ER_VECTORS$$$$Base'
  CFLAGS+=-D'_stored_data=Load$$$$RW_RAM$$$$Base'
  CFLAGS+=-D'_start_data=Image$$$$RW_RAM$$$$Base'
  CFLAGS+=-D'_end_data=Image$$$$RW_RAM$$$$Limit'
  CFLAGS+=-D'_start_bss=Image$$$$RW_RAM$$$$ZI$$$$Base'
  CFLAGS+=-D'_end_bss=Image$$$$RW_RAM$$$$ZI$$$$Limit'

  # Base armlink options shared by both images:
  # - the unreferenced vector table needs an explicit --keep or unused
  #   section elimination removes it
  # - RW data compression must be off: wolfBoot copies .data to RAM itself,
  #   word by word, and would copy the compressed image
  # - Suppress L6314W (no section matches pattern) is suppressed: the scatter
  #   files list sections that are only present in some configurations (e.g.
  #   .ramcode)
  # - --no_startup: wolfBoot has its own reset handler.
  ARMCLANG_LDFLAGS=--cpu=Cortex-M33 --fpu=SoftVFP --entry=isr_reset \
                   --keep="*(.isr_vector)" --datacompressor=off --remove \
                   --no_startup --info=sizes,totals,unused --diag_suppress=6314
endif

ifeq ($(USE_GCC),1)
  ## Toolchain setup
  CC=$(CROSS_COMPILE)gcc
  LD=$(CROSS_COMPILE)gcc
  AS=$(CROSS_COMPILE)gcc
  AR=$(CROSS_COMPILE)ar
  OBJCOPY?=$(CROSS_COMPILE)objcopy
  SIZE=$(CROSS_COMPILE)size
endif
OUTPUT_FLAG?=-o

ifeq ($(filter $(TARGET),x86_fsp_qemu kontron_vx3060_s2),$(TARGET))
  FSP=1
  CFLAGS+=-ffunction-sections -fdata-sections -ffreestanding -nostdlib -static
  # some std libc have headers that bring in extra symbols used in
  # FORTIFY_SOURCE realated checks. Use -U_FORTIFY_SOURCE to avoid that.
  CFLAGS+=-U_FORTIFY_SOURCE
  ifeq ($(TARGET), kontron_vx3060_s2)
    FSP_TGL=1
    CFLAGS+=-DWOLFBOOT_TGL=1
  endif
endif

ifeq ($(TARGET),x86_fsp_qemu)
    OBJS+=src/x86/qemu_fsp.o
endif

# x86-64 FSP targets
ifeq ("${FSP}", "1")
  CFLAGS+=-DWOLFBOOT_FSP=1
  USE_GCC_HEADLESS=0
  LD_START_GROUP =
  LD_END_GROUP =
  LD := ld
  # load to address in RAM after wolfBoot (aligned to 16 bytes)
  CFLAGS+=-DWOLFBOOT_NO_LOAD_ADDRESS
  ifeq ($(filter-out $(STAGE1),1),)
    # building stage1
    ifeq ($(FSP_TGL), 1)
      LSCRIPT_IN = ../hal/x86_fsp_tgl_stage1.ld
    else
      LSCRIPT_IN = ../hal/$(TARGET)_stage1.ld
    endif
    # using ../wolfboot.map as stage1 is built from stage1 sub-directory
    LDFLAGS = --defsym main=0x`nm ../wolfboot.elf | grep -w main | awk '{print $$1}'` \
              --defsym wb_start_bss=0x`nm ../wolfboot.elf | grep -w _start_bss | awk '{print $$1}'` \
              --defsym wb_end_bss=0x`nm ../wolfboot.elf | grep -w _end_bss | awk '{print $$1}'` \
              --defsym _stage2_params=0x`nm ../wolfboot.elf | grep -w _stage2_params | awk '{print $$1}'`
    LDFLAGS +=  --gc-sections --entry=reset_vector -T $(LSCRIPT) -m elf_i386  -Map=loader_stage1.map
    OBJS += src/boot_x86_fsp.o
    OBJS += src/boot_x86_fsp_start.o
    OBJS += src/fsp_m.o
    OBJS += src/fsp_t.o
    OBJS += src/wolfboot_raw.o
    OBJS += src/x86/common.o
    OBJS += src/x86/hob.o
    OBJS += src/pci.o
    CFLAGS+=-DWOLFBOOT_USE_PCI
    OBJS += hal/x86_uart.o
    OBJS += src/string.o
    OBJS += src/stage2_params.o
    OBJS += src/x86/fsp.o
    ifeq ($(filter-out $(STAGE1_AUTH),1),)
      OBJS += src/libwolfboot.o
      OBJS += src/image.o
      OBJS += src/keystore.o
      OBJS += src/sig_wolfboot_raw.o
      ifeq ($(TARGET), kontron_vx3060_s2)
        OBJS += hal/kontron_vx3060_s2_loader.o
      endif
      OBJS += $(WOLFCRYPT_OBJS)
      CFLAGS+=-DSTAGE1_AUTH
    endif

    CFLAGS += -fno-stack-protector -m32 -fno-PIC -fno-pie -mno-mmx -mno-sse -DDEBUG_UART
    CFLAGS += -DFSP_M_BASE=$(FSP_M_BASE)
    ifeq ($(FSP_TGL), 1)
      OBJS+=src/x86/tgl_fsp.o
      OBJS+=src/ucode0.o
      CFLAGS += -DUCODE0_ADDRESS=$(UCODE0_BASE)
    endif
    ifeq ($(TARGET),x86_fsp_qemu)
      OBJS += hal/x86_fsp_qemu_loader.o
    endif
  else
    # building wolfBoot
    ifeq ($(FSP_TGL), 1)
      LSCRIPT_IN = hal/x86_fsp_tgl.ld.in
    else
      LSCRIPT_IN = hal/$(TARGET).ld.in
    endif
    LDFLAGS = --gc-sections --entry=main  -T $(LSCRIPT) -Map=wolfboot.map
    CFLAGS += -fno-stack-protector -fno-PIC -fno-pie -mno-mmx -mno-sse -Os -DDEBUG_UART
    CFLAGS += -DFSP_M_BASE=$(FSP_M_BASE)
    OBJS += hal/x86_fsp_tgl.o
    OBJS += hal/x86_uart.o
    OBJS += src/boot_x86_fsp_payload.o
    OBJS += src/x86/common.o
    OBJS += src/x86/hob.o
    OBJS += src/pci.o
    CFLAGS+=-DWOLFBOOT_USE_PCI
    OBJS += src/x86/ahci.o
    OBJS += src/x86/ata.o
    OBJS += src/gpt.o
    OBJS += src/disk.o
    OBJS += src/x86/mptable.o
    OBJS += src/stage2_params.o
    OBJS += src/x86/exceptions.o
    OBJS += src/x86/gdt.o
    OBJS += src/x86/fsp.o
    OBJS += src/x86/fsp_s.o
    UPDATE_OBJS := src/update_disk.o
    CFLAGS+=-DWOLFBOOT_UPDATE_DISK
    ifeq ($(64BIT),1)
      LDFLAGS += -m elf_x86_64 --oformat elf64-x86-64
      CFLAGS += -m64
    else
      CFLAGS += -m32
      LDFLAGS += -m elf_i386 --oformat elf32-i386
    endif
    ifeq ($(FSP_TGL), 1)
      OBJS+=src/x86/tgl_fsp.o
    endif
  endif
  ifeq ($(64BIT),1)
    OBJS += src/x86/paging.o
  endif
endif

ifneq ($(CROSS_COMPILE_PATH),)
  # optional path for cross compiler includes
  CFLAGS+=-I$(CROSS_COMPILE_PATH)/usr/include --sysroot=$(CROSS_COMPILE_PATH)
  LDFLAGS+=-L$(CROSS_COMPILE_PATH)/usr/lib --sysroot=$(CROSS_COMPILE_PATH)
endif


ifeq ($(TARGET),x86_64_efi)
  USE_GCC_HEADLESS=0
  GNU_EFI_LIB_PATH?=/usr/lib
  GNU_EFI_CRT0=$(GNU_EFI_LIB_PATH)/crt0-efi-x86_64.o
  GNU_EFI_LSCRIPT=$(GNU_EFI_LIB_PATH)/elf_x86_64_efi.lds
  CFLAGS += -fpic -ffreestanding -fno-stack-protector -fno-stack-check \
            -fshort-wchar -mno-red-zone -maccumulate-outgoing-args
  CFLAGS += -I/usr/include/efi -I/usr/include/efi/x86_64 \
            -DTARGET_X86_64_EFI  -DWOLFBOOT_DUALBOOT
  # avoid using of fixed LOAD_ADDRESS, uefi target uses dynamic location
  CFLAGS += -DWOLFBOOT_NO_LOAD_ADDRESS
  LDFLAGS = -shared -Bsymbolic -L/usr/lib -T$(GNU_EFI_LSCRIPT)
  LD_START_GROUP = $(GNU_EFI_CRT0)
  LD_END_GROUP = -lgnuefi -lefi
  LD = ld
  UPDATE_OBJS:=src/update_ram.o
endif

ifeq ($(TARGET),aarch64_efi)
  # Generic AArch64 UEFI application (validated on NVIDIA Jetson Orin Nano).
  # Build gnu-efi for aarch64 first: ./tools/scripts/build-gnu-efi-aarch64.sh
  # (override the install path with GNU_EFI_PATH=... if needed).
  USE_GCC_HEADLESS=0
  GNU_EFI_PATH?=tools/gnu-efi-aarch64
  GNU_EFI_LIB_PATH?=$(GNU_EFI_PATH)/lib
  GNU_EFI_INC_PATH?=$(GNU_EFI_PATH)/include
  GNU_EFI_CRT0=$(GNU_EFI_LIB_PATH)/crt0-efi-aarch64.o
  GNU_EFI_LSCRIPT=$(GNU_EFI_LIB_PATH)/elf_aarch64_efi.lds
  CFLAGS += -fpic -ffreestanding -fno-stack-protector -fno-stack-check \
            -fshort-wchar -mstrict-align
  CFLAGS += -I$(GNU_EFI_INC_PATH) -I$(GNU_EFI_INC_PATH)/efi \
            -I$(GNU_EFI_INC_PATH)/efi/aarch64 \
            -DTARGET_aarch64_efi -DWOLFBOOT_DUALBOOT
  # avoid using of fixed LOAD_ADDRESS, uefi target uses dynamic location
  CFLAGS += -DWOLFBOOT_NO_LOAD_ADDRESS
  # AArch64 PE/COFF output format for objcopy (see the wolfboot.efi rule).
  # This binutils exposes it as pei-aarch64-little (not efi-app-aarch64).
  EFI_OBJCOPY_TARGET=pei-aarch64-little
  # --allow-multiple-definition: gnu-efi's libefi init.o (pulled in for
  # InitializeLib) also defines memset/memcpy; wolfBoot's src/string.o comes
  # first in link order and wins.
  LDFLAGS = -shared -Bsymbolic --allow-multiple-definition \
            -L$(GNU_EFI_LIB_PATH) -T$(GNU_EFI_LSCRIPT)
  LD_START_GROUP = $(GNU_EFI_CRT0)
  LD_END_GROUP = -lgnuefi -lefi
  LD = $(CROSS_COMPILE)ld
  UPDATE_OBJS:=src/update_ram.o
endif

ifeq ($(ARCH),sim)
  USE_GCC_HEADLESS=0
  LD = gcc
  ifneq ($(TARGET),library)
  ifneq ($(TARGET),library_fs)
    UPDATE_OBJS:=src/update_flash.o
  endif
  endif
  ifeq ($(TARGET),library_fs)
    UPDATE_OBJS += hal/filesystem.o
  endif
  LD_START_GROUP=
  LD_END_GROUP=
  BOOT_IMG=test-app/image.elf
  CFLAGS+=-DARCH_SIM
  ifneq ($(ELF_FLASH_SCATTER),1)
    CFLAGS+=-DWOLFBOOT_USE_STDLIBC
  endif
  ifeq ($(FORCE_32BIT),1)
    CFLAGS+=-m32
    LDFLAGS+=-m32
  endif
  ifeq ($(SPMATH),1)
    ifeq ($(FORCE_32BIT),1)
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
      CFLAGS+=-DWOLFSSL_SP_DIV_WORD_HALF
    else ifeq ($(shell uname -m),aarch64)
      CFLAGS += -DARCH_AARCH64 -DFAST_MEMCPY
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_arm64.o
    else
      MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
      CFLAGS+=-DWOLFSSL_SP_DIV_WORD_HALF
    endif
  endif
  ifeq ($(WOLFHSM_CLIENT),1)
    WOLFHSM_OBJS += $(WOLFBOOT_LIB_WOLFHSM)/port/posix/posix_transport_tcp.o
  endif
  ifeq ($(WOLFHSM_SERVER),1)
    WOLFHSM_OBJS += $(WOLFBOOT_LIB_WOLFHSM)/port/posix/posix_flash_file.o \
                    $(WOLFBOOT_LIB_WOLFHSM)/src/wh_transport_mem.o

  endif
  # wolfHSM NVM image generation support for simulator
  # User must provide NVM_CONFIG for their specific setup
  ifneq ($(filter 1,$(WOLFHSM_CLIENT) $(WOLFHSM_SERVER)),)
    WH_NVM_BIN ?= whNvmImage.bin
    WH_NVM_HEX ?= whNvmImage.hex
    WH_NVM_PART_SIZE ?= 16384 # must match partition size in hal/sim.c
    WH_NVM_BASE_ADDRESS ?= 0x0

    CFLAGS += -DWOLFHSM_CFG_NO_SYS_TIME
  endif
endif

# Infineon AURIX Tricore
ifeq ($(ARCH), AURIX_TC3)
  # TC3xx specific
  ifeq ($(TARGET), aurix_tc3xx)
    USE_GCC?=1

    CFLAGS += -I$(TC3_DIR) -Ihal

    CFLAGS += -Werror
    CFLAGS += -Wall -Wdiv-by-zero -Warray-bounds -Wformat -Wformat-security \
              -Wignored-qualifiers -Wno-implicit-function-declaration \
              -Wno-type-limits -Wno-unused-variable -Wno-unused-parameter \
              -Wno-missing-braces -fno-common -pipe \
              -ffunction-sections -fdata-sections -fmessage-length=0 \
              -std=gnu99 -DPART_BOOT_EXT -DPART_UPDATE_EXT -DPART_SWAP_EXT \
              -DHAVE_TC3XX -DWOLFBOOT_LOADER_MAIN

    # Set TC3_CFG_DFLASH_SINGLE_ENDED=1 for devices with DFLASH provisioned in single
    # ended mode (default expects complement sensing)
    ifeq ($(TC3_CFG_DFLASH_SINGLE_ENDED),1)
      CFLAGS += -DTC3_CFG_DFLASH_SINGLE_ENDED
    endif

    # Makefile shennanigans for "if (WOLFHSM_CLIENT==1 || WOLFHSM_SERVER==1)"
    ifneq ($(filter 1,$(WOLFHSM_CLIENT) $(WOLFHSM_SERVER)),)
      # Common wolfHSM port files
      CFLAGS += -I$(WOLFHSM_INFINEON_TC3XX)/port -DWOLFHSM_CFG_DMA \
                -DWOLFHSM_CFG_NO_SYS_TIME
      OBJS += $(WOLFHSM_INFINEON_TC3XX)/port/tchsm_common.o \
              $(WOLFHSM_INFINEON_TC3XX)/port/tchsm_hsmhost.o
      # General wolfHSM files
      OBJS += $(WOLFBOOT_LIB_WOLFHSM)/src/wh_transport_mem.o

      # NVM image generation variables
      WH_NVM_BIN ?= whNvmImage.bin
      WH_NVM_HEX ?= whNvmImage.hex
      # NVM partition is half of DFLASH1; bank size depends on sensing mode
      ifeq ($(TC3_CFG_DFLASH_SINGLE_ENDED),1)
        WH_NVM_PART_SIZE ?= 0x10000
      else
        WH_NVM_PART_SIZE ?= 0x8000
      endif
      # Default to base of HSM DFLASH1
      WH_NVM_BASE_ADDRESS ?= 0xAFC00000

      # Select config file based on certificate chain verification
      # Use ?= to allow user override via command line (e.g., for offline cert chain)
      ifneq ($(CERT_CHAIN_VERIFY),)
        NVM_CONFIG ?= tools/scripts/tc3xx/wolfBoot-wolfHSM-dummy-certchain.nvminit
      else
        NVM_CONFIG ?= tools/scripts/tc3xx/wolfBoot-wolfHSM-keys.nvminit
      endif
    endif

    # Set BOOT_IMG to the ELF file instead of default bin when ELF_FLASH_SCATTER is enabled
    ifeq ($(ELF_FLASH_SCATTER),1)
      BOOT_IMG=test-app/image.elf
    endif

    ifeq ($(AURIX_TC3_HSM),1)
      ARCH_FLASH_OFFSET?=0x80028000
      # HSM compiler flags, build options, source code, etc
      ifeq ($(USE_GCC),1)
        # Just arm-none-eabi-gcc for now
        CROSS_COMPILE?=arm-none-eabi-
      else
      endif

      # Compiler flags
      ifeq ($(NO_ASM),1)
        ifeq ($(SPMATH),1)
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o
        endif
      else
        ifeq ($(SPMATH),1)
          CFLAGS+=-DWOLFSSL_SP_ASM -DWOLFSSL_SP_ARM_CORTEX_M_ASM -DWOLFSSL_SP_NO_UMAAL
          MATH_OBJS += $(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_cortexm.o
          CFLAGS+=$(CORTEXM_ARM_EXTRA_CFLAGS) -DWOLFSSL_ARM_ARCH=7
        endif
      endif

      CFLAGS += -march=armv7-m -mcpu=cortex-m3 -mthumb -mlittle-endian \
                -fno-builtin -DWOLFBOOT_AURIX_TC3XX_HSM

      # Temporary fix masking wolfCrypt unused function warning with RSA_LOW_MEM
      CFLAGS += -Wno-unused-function

      LDFLAGS += -march=armv7-m -mcpu=cortex-m3 -mthumb -mlittle-endian -g \
                --specs=nano.specs -Wl,--gc-sections -static -Wl,--cref -Wl,-n \
                -ffunction-sections -fdata-sections \
                -nostartfiles \
                -Wl,-Map="wolfboot.map" \
                -Wl,-L$(TC3_DIR)/tc3

      LSCRIPT_IN=hal/$(TARGET)_hsm.ld

      # wolfHSM port server-specific files
      ifeq ($(WOLFHSM_SERVER),1)
        USE_GCC_HEADLESS=0

        CFLAGS += -I$(WOLFHSM_INFINEON_TC3XX)/port/server

        OBJS += $(WOLFHSM_INFINEON_TC3XX)/port/server/port_halflash_df1.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/io.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/sysmem.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_hh_hsm.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_utils.o\
          $(WOLFHSM_INFINEON_TC3XX)/port/server/ccb_hsm.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_hash.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_aes.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_cmac.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_pk.o \
          $(WOLFHSM_INFINEON_TC3XX)/port/server/tchsm_trng.o
      endif

      # HSM BSP specific object files
      OBJS += $(TC3_DIR)/src/tc3_clock.o \
              $(TC3_DIR)/src/tc3_flash.o \
              $(TC3_DIR)/src/tc3_gpio.o \
              $(TC3_DIR)/src/tc3_uart.o \
              $(TC3_DIR)/src/tc3.o \
              $(TC3_DIR)/src/tc3arm.o \
              $(TC3_DIR)/src/tc3arm_crt.o \
              $(TC3_DIR)/../tc3arm_bootloader/tc3arm_bootloader.o

    else
      # Tricore compiler settings
      ARCH_FLASH_OFFSET?=0x800A0000
      ifeq ($(USE_GCC),1)
        HT_ROOT?=/opt/hightec/gnutri_v4.9.4.1-11fcedf-lin64
        CROSS_COMPILE?=$(HT_ROOT)/bin/tricore-
      else
        HT_ROOT?=~/HighTec/toolchains/tricore/v9.1.2
        CROSS_COMPILE?=$(HT_ROOT)/bin
        CC=$(CROSS_COMPILE)/clang
        LD=$(CROSS_COMPILE)/clang
        AS=$(CROSS_COMPILE)/clang
        AR=$(CROSS_COMPILE)/llvm-ar
        OBJCOPY=tricore-objcopy
        SIZE=$(CROSS_COMPILE)/llvm-size
      endif

      # No asm for you!
      MATH_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/sp_c32.o

      # Arch settings for tricore
      ifeq ($(USE_GCC),1)
        CFLAGS+= -fshort-double -mtc162 -fstrict-volatile-bitfields -fno-builtin \
                 -fno-strict-aliasing
      else
        CFLAGS+= --target=tricore -march=tc162
      endif

      DEBUG_AFLAGS= -Wa,--gdwarf-2

      # Linker flags
      ifeq ($(USE_GCC),1)
        LDFLAGS+= -fshort-double -mtc162 -nostartfiles -Wl,--extmap="a"
      else
        LDFLAGS+= --target=tricore -march=tc162 -Wl,--entry=tc3tc_start
      endif

      LDFLAGS+= -Wl,--gc-sections -Wl,--cref -Wl,-n \
                -ffunction-sections -fdata-sections \
                -Wl,-Map="wolfboot.map" \
                -Wl,-L$(TC3_DIR)/tc3

      # Tricore BSP layer (replace with only tricore specific stuff)
      OBJS += $(TC3_DIR)/src/tc3_clock.o \
              $(TC3_DIR)/src/tc3_flash.o \
              $(TC3_DIR)/src/tc3_gpio.o \
              $(TC3_DIR)/src/tc3_uart.o \
              $(TC3_DIR)/src/tc3.o \
              $(TC3_DIR)/src/tc3tc_isr.o \
              $(TC3_DIR)/src/tc3tc_traps.o \
              $(TC3_DIR)/src/tc3tc.o \
              $(TC3_DIR)/src/tc3tc_crt.o \
              $(TC3_DIR)/../tc3tc_bootloader/tc3tc_bootloader.o

      ifeq ($(WOLFHSM_CLIENT),1)
        CFLAGS += -I$(WOLFHSM_INFINEON_TC3XX)/port/client
        OBJS += $(WOLFHSM_INFINEON_TC3XX)/port/client/hsm_ipc.o \
                $(WOLFHSM_INFINEON_TC3XX)/port/client/io.o \
                $(WOLFHSM_INFINEON_TC3XX)/port/client/tchsm_hh_host.o
      endif

    endif # !AURIX_TC3_HSM
  endif

  # TC4xx specific
  ifeq ($(TARGET), aurix_tc4xx)
    # Coming soon ;-)
  endif
endif

CFLAGS+=-DARCH_FLASH_OFFSET=$(ARCH_FLASH_OFFSET)
BOOT_IMG?=test-app/image.bin

# When ELF loading is enabled, sign the ELF file (not the flat binary)
ifeq ($(ELF),1)
  BOOT_IMG=test-app/image.elf
endif

## Update mechanism
ifeq ($(ARCH),AARCH64)
ifeq ($(TARGET),aarch64_efi)
  # UEFI app: UEFI owns MMU/FDT, so skip the -DMMU/-DWOLFBOOT_FDT DTS path and
  # fdt.o/gpt.o (like x86_64_efi). update_ram.o is set in the block above.
  # DEBUG=1: route wolfBoot_printf to the UEFI console (gnu-efi Print).
  ifeq ($(DEBUG),1)
    CFLAGS += -DWOLFBOOT_DEBUG_EFI=1
    # Drop -Werror only here: WOLFBOOT_DEBUG_EFI pulls gnu-efi headers into every
    # TU and efidebug.h redefines the -DDEBUG object macro (added by DEBUG=1) as
    # a function macro. That cpp macro-redefinition warning has no -W name, so it
    # can't be scoped with -Wno-error=<name>; our own sources stay warning-clean.
    CFLAGS := $(filter-out -Werror,$(CFLAGS))
  endif
else
  CFLAGS+=-DMMU -DWOLFBOOT_FDT -DWOLFBOOT_DUALBOOT
  OBJS+=src/fdt.o
  # src/gpt.c provides the CRC32 helpers reused by update_ram.c's uImage
  # header validator under WOLFBOOT_UBOOT_LEGACY (zynq, versal). Also
  # needed for the disk variant. Targets without WOLFBOOT_UBOOT_LEGACY or
  # disk support (e.g. nxp_ls1028a) GC the unused code via --gc-sections.
  OBJS+=src/gpt.o
  ifneq ($(filter 1,$(DISK_SDCARD) $(DISK_EMMC)),)
    # Disk-based boot (SD card or eMMC)
    CFLAGS+=-DWOLFBOOT_UPDATE_DISK
    ifeq ($(MAX_DISKS),)
      MAX_DISKS=1
    endif
    CFLAGS+=-DMAX_DISKS=$(MAX_DISKS)
    UPDATE_OBJS:=src/update_disk.o
    OBJS+=src/disk.o
  else
    # RAM-based boot from external flash (default)
    UPDATE_OBJS:=src/update_ram.o
  endif
endif
else
  ifeq ($(DUALBANK_SWAP),1)
    CFLAGS+=-DWOLFBOOT_DUALBOOT
    UPDATE_OBJS:=src/update_flash_hwswap.o
  endif
endif

## For library target disable partitions
ifeq ($(TARGET),library)
  WOLFBOOT_NO_PARTITIONS=1
  NO_LOADER=1
endif

ifeq ($(TARGET),library_fs)
  EXT_FLASH=1
  # Force all partitions to be marked as external
  NO_XIP=1
  NO_SWAP_EXT=
  NO_LOADER=1
  USE_GCC_HEADLESS=0
  CFLAGS+=-DWOLFBOOT_USE_STDLIBC
endif


## Set default update object
ifneq ($(WOLFBOOT_NO_PARTITIONS),1)
  ifeq ($(UPDATE_OBJS),)
    UPDATE_OBJS:=./src/update_flash.o
  endif
endif

## wolfBoot origin
ifeq ($(WOLFBOOT_ORIGIN),)
  WOLFBOOT_ORIGIN=$(ARCH_FLASH_OFFSET)
endif
CFLAGS+=-DWOLFBOOT_ORIGIN=$(WOLFBOOT_ORIGIN)
CFLAGS+=-DBOOTLOADER_PARTITION_SIZE=$(BOOTLOADER_PARTITION_SIZE)

## Debug
WOLFCRYPT_OBJS+=$(WOLFBOOT_LIB_WOLFSSL)/wolfcrypt/src/logging.o

# Debug UART
ifeq ($(DEBUG_UART),1)
  CFLAGS+=-DDEBUG_UART

  # If this target has a UART driver, add it to the OBJS. When WOLFHAL=1,
  # the wolfHAL board.mk pulls in its own UART driver and hal/wolfhal.c
  # provides uart_write; the legacy driver would collide on uart_write.
  ifneq ($(WOLFHAL),1)
    ifneq (,$(wildcard hal/uart/uart_drv_$(TARGET).c))
      OBJS+=hal/uart/uart_drv_$(TARGET).o
    endif
  endif
endif

# UART QSPI programmer (PolarFire SoC MPFS): receive binary over UART and
# write it directly to QSPI flash. Requires EXT_FLASH=1 and DEBUG_UART=1.
# Use tools/scripts/mpfs_qspi_prog.py on the host side.
ifeq ($(UART_QSPI_PROGRAM),1)
  CFLAGS+=-DUART_QSPI_PROGRAM
endif

ifeq ($(NXP_CUSTOM_DCD),1)
  CFLAGS+=-DNXP_CUSTOM_DCD
  OBJS+=$(NXP_CUSTOM_DCD_OBJS)
endif

ifeq ($(BIG_ENDIAN),1)
  CFLAGS+=-D"BIG_ENDIAN_ORDER"
endif

CFLAGS+=-DWOLFBOOT_ARCH_$(ARCH)
CFLAGS+=-DTARGET_$(TARGET)